Dynapac PL2000F, Инструкция по эксплуатации

Страница: 165 / 283

Machine description
154
4812313240.pdf
2017-12-1
C r o s s S l o p e 3 D
3.26
4.00
O F F S E T
C r o s s S l o p e 3 D
3.26
4.00
O F F S E T
Operating with the Cross-Slope sensor
The Cross-Slope sensor has been selected for one of the two sides with the help
of the sensor change key (also see “6.6 Sensor selection”). The other side is
controlled manually or by means of a grade sensor.
1) If the automatic light of the
side selected for cross-slope
operation lights up, switch this
control loop to manual mode by
pressing the corresponding A/M key
(manual = automatic light off).
2) Enter the desired s e t
point f o r the milling drum’s
slope angle taking account of
the sign by using the UP/DOW
N keys of the corresponding loop.
By briefly and simultaneously
pressing the UP and DOWN keys
0.0% is set as set point.
If you hold down both keys until the
display jumps from 0.0% to “Set”, the
current milling drum’s slope will be
adopted as set point.