Dynapac PL2000F, Инструкция по эксплуатации

Страница: 191 / 283

Miscellaneous
180 4812313240.pdf
2017-12-1
There are two fix points (1) on each side of the
machine frame, at the front and back.
The machine should be fastened to these points
during transport on the transport vehicle.
The machine is to be fixed to the transporter using
sufficiently sized shackles (chains) and secured
so that it cannot tilt, slide or fall off.
Attention: when working, be sure that the
front lifting point is as state A.
The lifting weight of the machine is
shown on the lifting plate on the right front
frame and the left rear frame.
Stand well clear of the hoisted machine!
Make sure that the lifting hooks are properly
secured.
The machine must be held in a horizontal
position when lifted!