Dynapac PL2000F, Инструкция по эксплуатации

Страница: 141 / 283

Machine description
130
4812313240.pdf
2017-12-1
Water filling (pressure fill) connection for
water tank
The connection for the water tank’s pressure
fill can be found on the left rear underside of
the machine.
To fill the water tank:
- Open lock cock.
- Unscrew seal cap (if necessary use
wrench)
- Attach pressure pipe and tighten
- Signal to the operator of the external filling
pump that the filling process can be
started.
Switch the filling pump as soon as the level of
water required in the water tank is reached
(monitor using LCD display on the operating
panel).
- Close the lock cock again before
removing the filling hose.
- An overflow can be found on the
underside of the machine. Excess water
flows out through this if overfilled.
Fig. Connection