Dynapac PL2000F, Инструкция по эксплуатации

Страница: 149 / 283

Machine description
138
4812313240.pdf
2017-12-1
Compressed air system (O)
The compressed air tank and connected
maintenance unit can be found behind the
storage room flap on the left-hand side of the
machine.
There is a maintenance unit on the
compressed air tank. This unit separates water
from the air and enriches the airflow with a fine
veil of oil and therefore ensures that the
components connected have a longer service
life. The air pressure required can be set on
the pressure reducer (1).
- The pressure level set is indicated on the
pressure gauge (2).
- Various compressed air tools (e.g. the
pneumatic milling tool driver) can be connected
to the quick connector (3).
The compressed air coupling is accessible from
outside and can be found on the rear of the
storage area cabinet.
When using the compressed air tools,
ensure that the oiler (4) is filled with oil under
pressure.
Fig. 1. Pressure reducer
2. Pressure gauge
3. Quick connector
4. Oiler
1
2
3
4