Dynapac PL2000F, Инструкция по эксплуатации

Страница: 14 / 283

Introduction
3
4812313240.pdf 2017-12-1
General
This manual contains instructions for machine safety,
operation, transport and maintenance.
The machine must be correctly maintained for top
performance level.
The machine should be kept clean so that any
leakages, loose bolts and loose connections are
discovered at as early as possible.
Inspect the machine every day, before starting.
Inspect the entire machine so that any leakages or
other faults are detected.
Check the ground under the machine. Leakages are
more easily detected on the ground than on the
machine itself.
THINK ENVIRONMENT ! Do not release oil, fuel and
other environmentally hazardous substances into the
environment. Always send used filters, drain oil and
fuel remnants to environmentally correct disposal.
This manual contains instructions for periodic
maintenance normally carried out by the operator.
Additional instructions for the engine can be found in
the manufacturer’s engine manual.