Dynapac PL2000F, Инструкция по эксплуатации

Страница: 227 / 283

216
Maintenance
4812313240.pdf
2017-12-1
Cleaning tank and system
For maintenance and repair work, it may be
necessary for the fuel to be drained off.
The drainage point for this diesel tank is in the
rear section of the machine underside.
‐ Unscrew seal cap (1).
‐ Move lever (2) and drain off the volume of fuel
required into a suitable container.
‐ Use lever (2) to close drain and correctly refit
seal cap (1).
Dispose of the fuel drained off properly.
Diesel engine
The oil level in the engine should be tested
before each start with the dipstick.
Check the oil only when the machine is at a
standstill!
The dipstick can be found behind the maintenance
flap of the operator’s control panel.
Too much oil in the engine damages the seals;
too little oil leads to overheating and destruction of
the engine.
The filler neck for engine oil can be found behind the
maintenance flap of the operator’s control panel.
Follow Engine operating instructions!
Fig. 1. Seal cap
2. Lever
Fig. Diesel engine