Dynapac PL2000F, Инструкция по эксплуатации

Страница: 270 / 283

Maintenance
259
4812313240.pdf
2017-12-1
Scraper hydraulic cylinder
A grease nipple is located on each bearing point
(top and bottom) of the hydraulic cylinder on the
drum flap.
Add 3 loads of grease with a grease gun.
Milling drum bearing
Each time the drum is replaced, the condition of
the bearing must be checked and the bearing
must be filled with fresh grease!
- Lower side board until the screw plug (1) is
visible
- Remove screw plug
Use a grease gun to add approx. 500ccm of
grease.
- Refit screw plug and protective cover.
Fig. Lubrication point
1
Fig.1. Screw plug