Dynapac PL2000F, Инструкция по эксплуатации

Страница: 19 / 283

Safety - General instructions
8 4812313240.pdf
2017-12-1
Slopes (Tip over risk)
Bear in mind that loose ground, and conveyor
movements changes the center of gravity and
can cause the machine to tip over on slopes
lower than specified.
Follow the stated recommendations for
maximum permitted angle in the picture.
Safety cannot be guaranteed when the max.
permitted angle of inclination is exceeded.
Before operating your vehicle in an inclined
position (gradient, slope, lateral inclination) which
is above the specified limit valve, please consult
the customer service department for your
vehicle!
Where possible, avoid driving across slopes.
Drive instead straight up and down sloping
ground
Before operating your vehicle in an inclined
position (gradient, slope, lateral inclination) which
is above the specified limit valve, please consult
the customer service department for your
vehicle!
Maximum permitted angle
of inclination 34% (19°)
Maximum permitted angle of
inclination 17% (10°)
Fig. Operating on slopes
19°
10
°