PRORXD Broadcast Receiver User Guide
Commercial in Confidence
Broadcast Solutions, HD/SD Products,
PRORXD
100167
Revision: 7.0
Commercial in Confidence
Page 1-6
No
Item
Function
1
Antenna.
Matched to band of the downconverter.
Do not tighten too much – tighten with
your hand.
2
Downconverter.
Enables the PRORXD to be used in
different RF bands.
CAUTION: Do not turn the barrel of the
downconverter when attaching antennas
or IF cables. Too much twisting will
damage the inner pin.
CAUTION: Do not install the Downconverter
upside down. Power from the IF cable will
damage components in the downconverter.
3
IF cable, TNC 2-way plug, (pins) to BNC 2-way
plug, (pins).
Downconverter to PRORXD connection.
IF – Intermediate Frequency.
4
BNC 2-way receptacle (sockets), 50-850MHz,
marked IF1 to IF8.
The IF cables from the downconverters
connect here.
5ab
XLR 3-way receptacle (pins) marked AUDIO 1L and
AUDIO 1R.
Channel two is marked AUDIO 2L and AUDIO 2R.
Stereo Line Level Audio Outputs, left and
Right, channel one and two.
6ab
XLR 3-way receptacle (sockets) marked IFB/Audio
In 1.
Channel 2 is marked IFB/Audio In 2.
IFB – Interruptible Fold back.
The IFB is a special intercom circuit that
consists of a mix-minus program feed sent
to an earpiece worn by presenter via IP
(audio that is being “fed back” to
presenter) that can be interrupted and
replaced by a television producer's or
director's intercom microphone. That
microphone is connected here.
Each channel has this facility.
7ab
RJ45 8-way receptacle (sockets) marked ETH0 and
ETH1.
Ethernet 1 and 2. 10/100/1G Ethernet
Ports with PoE (Power over Ethernet)
support.
Used for Remote Control through a web
browser and for streaming.
8ab
HDMI receptacle (sockets) marked HDMI.
HDMI Video output.
Each channel has this facility.
9ab
Lemo OB 5-way receptacle (sockets) twin key
marked AUDIO 3.
Channel two is marked AUDIO 4.
For Audio output.
Each channel has this facility.
10ab
BNC 2-way receptacle (sockets) marked
COMP/HD-SDI.
CBVS/SDI/HD-SDI//ASI video output.
