PRORXD Broadcast Receiver User Guide
Commercial in Confidence
Broadcast Solutions, HD/SD Products,
PRORXD
100167
Revision: 7.0
Commercial in Confidence
Page 7-75
No
Property
Range
Description
14
Multicast
Address
239.16.33.254
This is available when you select IP as the Input.
This text box enables you to change the multicast
address to be received by the unit. The default
value is 239.16.33.254.
15
Stream Port
10000
Range available is
1024-65535
This is available when you select IP as the Input.
Protocols like TCP or UDP use port numbers in the
header to point traffic around the network. Low
port numbers are used by computer systems for
predefined tasks. For example SMPT (for your
email service) uses port 25.
A good rule is to use numbers above 10,000 to
stop confliction with existing services.
When you set up a port number on many
computers on a network they will all listen for
packets directed to that port.
The default value is 10333.
16
Buffer Delay
(ms)
50ms for example
ms – milliseconds.
This is available when you select IP as the Input.
IP packets can be delivered unevenly which causes
jitters. This buffer is designed to make the flow of
data smoother by adding a small delay to the
stream.
17
Descrambling
Mode
If you wish to operate descrambling you’ll select
your mode here. You might not have all the modes
shown here as they are licensable features.
18
All Services
Selected Service
If you select List in Service Select Mode, this field
will allow you to apply descrambling just to the
service you selected in the Service List.
19
Descrambling
Keys
Change Keys Button.
After selecting a Descrambling Mode, push this
button to open the Enter Scrambling Key dialog
where you can set the key.
See
Setting up Encryption.
