PRORXD Broadcast Receiver User Guide
Commercial in Confidence
Broadcast Solutions, HD/SD Products,
PRORXD
100167
Revision: 7.0
Commercial in Confidence
Page 3-18
No
Item
Used for...
4
BNC 2-way Receptacle (sockets) x 4 marked
IF1 to IF4.
Connect your IF cables from the
downconverter / antenna assembly here.
Do not over tighten. Hand-tight only.
5
D-Type 9-way Receptacle, (sockets) marked
CTRL/DATA.
RS232 Data/Control port.
Data output.
Also enables you to control the PRORXD
serially if required.
6
XLR 4-way Receptacle, (pins) marked
POWER, 12V 4A.
Power input to the PRORXD.
7
BNC 2-way receptacle (sockets) marked
GENLOCK.
Connect your Genlock device to this port to
keep the receiver synchronised with all the
other equipment in your facility.
8
BNC 2-way receptacle (sockets) marked ASI
OUT.
Lets you connect this receiver to other
equipment in your operation at ASI level.
9
BNC 2-way receptacle (sockets) marked ASI
IN.
Lets you connect this receiver to other
equipment in your operation at ASI level.
10ab
BNC 2-way Receptacles, (sockets) marked
COMP/HD-SDI.
CBVS/SDI/HD-SDI//ASI video output.
11ab
HDMI Type-A 19-way Receptacle, sockets
marked HDMI.
HDMI (High Definition Multimedia Interface)
output.
Table 3-2 PRORXD-1RU Rear Panel Key