PRORXD Broadcast Receiver User Guide
Commercial in Confidence
Broadcast Solutions, HD/SD Products,
PRORXD
100167
Revision: 7.0
Commercial in Confidence
Page 3-20
3.5
Exploring the Rear Panel – PRORXD-2RU
Figure 3-4 PRORXD-2RU Rear Panel
No
Item
Function
1
BNC 2-way receptacle (sockets), 50-850MHz
marked IF1 to IF8.
The IF cables from the downconverters
connect here.
IF=Intermediate frequency.
2ab
XLR 3-way receptacle (pins) marked AUDIO 1L and
AUDIO 1R.
Channel two is marked AUDIO 2L and AUDIO 2R.
Stereo Line Level Audio Outputs, left and
Right, channel one.
Each channel has this facility.
3ab
XLR 3-way receptacle (sockets) marked IFB/Audio
In 1.
Channel 2 is marked IFB/Audio In 2.
IFB – Interruptible Fold back.
The IFB is a special intercom circuit that
consists of a mix-minus program feed sent
to an earpiece worn by presenter via IP
(audio that is being “fed back” to
presenter) that can be interrupted and
replaced by a television producer's or
director's intercom microphone. That
microphone is connected here.
Each channel has this facility.
4ab
RJ45 8-way receptacle (sockets) marked ETH0 and
ETH1.
Ethernet 1 and 2. 10/100/1G Ethernet
Ports with PoE (Power over Ethernet)
support. Used for Remote Control through
a web browser and for streaming.