PRORXD Broadcast Receiver User Guide
Commercial in Confidence
Broadcast Solutions, HD/SD Products,
PRORXD
100167
Revision: 7.0
Commercial in Confidence
Page 7-69
No
Property
Range
Description
1
Preset Name
Config 1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, 13,
14, 15, 16
This is where you set the current configuration.
2
Diversity Mode
The configuration of the diversity and channel
configuration of the receiver.
3
Modulation type
Narrowband
DVBT
UMVL
Select the modulation bandwidth you wish to
operate with.
UMVL- Ultra Mobile Video Link – licence dependant
bandwidths.
UMVL is a mixture of technologies between DVBT
and Narrowband. It is optimised for operation in
high speed mobile environments (like car racing
for example).
UMVL is also excellent when you are operating with
high frequency (4 GHz and above) transmissions.
4
DVBT Carrier
Mode
2K or 4K
If you selected DVBT as your Modulation Type
earlier, you can select how many carriers will be
used at this time.
2K=About 2000
4K=About 4000 (dual pedestal mode)
5
ASI Output
The source for the ASI output is selected here.
For example if you select Demod 1, then this will
send an ASI signal to the ASI Out port.
If you select Remux, the ASI Output will be made
up of whatever you configure in the Remux Input
field.
6
Remux Input
This field enables you to select what you wish to go
into the Remux. You can put together sources to be
remuxed into one ASI stream.
For example, Demod 1+ASI In will let you to have
received pictures being combined with a signal
from the ASI input port, all being sent to the ASI
Output port.
For correct operation all PIDs in the input streams
must be unique.
