background image

CQ-CM130U Installation Instructions 

(1)

YFM294C119CA

MP3 CD Player/Receiver

Model:

 CQ-CM130U

Supplied Hardware

1

1

1

2

1

1

No.

Diagram

Q'ty

Item

No.

Diagram

Q'ty

Item

Mounting Collar

Mounting Bolt (5 mm ø)

Power Connector

Trim Plate

Rubber Bushing

FX0214C384ZB

*

*

YFC054C081YA

Please read these instructions carefully before using this product and keep this manual for future reference.

YFM294C119CA  PTW1007-0        Printed in China

Installation Instructions

Installation Instructions

Lock Cancel Plate

YGAJ021012

Panasonic Consumer
Electronics Company,
Division of Panasonic 
Corporation of North America

One Panasonic Way, Secaucus, 
New Jersey 07094
http://www.panasonic.com    

Panasonic Sales Company,
Division of Panasonic Puerto 
Rico, Inc. (“PSC”)

Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
http://www.panasonic.com    

 and 

 consist of a set. (ZZBISC1101U-J)

©2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

e

q

How to install the unit

Installation

Trim plate 

y

 mounting

Locking point

Battery Cable reconnection

How to remove the unit

Remove the cable from the battery negative terminal.

Mounting collar 

q

 insertion.

 Bend mounting tabs.

Connection of power connector 

t

.

Bend appropriate tabs to secure the unit 
without backlash.

q

 

Screw the mounting bolt 

into the main unit.

w

 

Secure to the fire wall.

e

 

Slide the unit into the mounting collar until a click is 

heard. Securing the unit.

Main unit securing

w

Securing to fire wall

Using the rear support strap (Option)

Using the rubber bushing 

e

3 mm

Tapping screw (Option)

To the unit

Rear support strap (Option)

Hexagonal nut (Option)

Rear support bracket
(supplied with car)

Rubber Bushing 

e

To the unit

Mounting Bolt 

w

English

      

Caution

When this unit is installed in dashboard, 
ensure that there is sufficient air flow 
around the unit to prevent damage from 
overheating, do not block any ventilation 
holes on the unit.

Consult a professional for installation.

Verify the radio using the antenna and speakers before 

installation.

0 – 30°

Mounting angle right to left     : horizontal

                              front to rear  : 0 – 30°

Before Installation

Dashboard

THICKNESS
MIN. 4.75 mm {3/16

}

MAX. 5.56 mm {7/32

}

Before Wiring

❐ 

This installation information is designed for professional installers with knowledge of automobile electrical safety systems and is not 

intended for non-technical, do-it-yourself individuals. It does not contain instructions on the electrical installation and avoidance of 
potential harm to air bag, anti-theft and ABS braking or other systems necessary to install this product.

 

Any attempt to install this 

product in a motor vehicle by anyone other than a professional installer could cause damage to the electrical safety system and could 
result in serious personal injury or death.

❐ 

If your car is equipped with air bag and/or anti-theft systems, specific procedures may be required for connection and disconnection 

of the battery to install this product.

 

Before attempting installation of this electronic component against the manufacturer’s 

recommendation, you must contact your car dealer or manufacturer to determine the required procedure and strictly follow their 
instructions. 

FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT 
SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH.

WARNING

Mounting Bolt 

w

1

2

3

4

4

4

5

6

4

Clank!

      

Caution

● 

Wear gloves for safety.

● 

Make sure that wiring is completed before 

    installation.

Please refer to the “WARNING” statement above.

Exclusively operated with 12 V battery with negative (–)  
ground.

Connect the power lead (red) last.

Connect the battery lead (yellow) to the positive (+) terminal of 
the battery or fuse block terminal (BAT).

Strip about 5 mm {1/4

} of the lead ends for connection.

Apply insulating tape to bare leads.

182 mm {7 5/32

}

53 mm {2 3/32

}

q

w

q

w

1

2

3

Lock release

q

 

Insert the lock cancel plate 

r

 until you hear a click.

w

 

Pull the main unit.

Pull out the unit with
both hands.

Remove the trim plate 

y

.

VOL

SRC

/PWR

1

2

3

4

5

6

CQ-CM130U

TU

N

E

/T

RA

CK

FO

LD

ER

SCROLL

RANDOM

SCAN

REPEAT

P

U

S

H

S

E

L

SQ

Отзывы: