DSEGenset DSE8610 Скачать руководство пользователя страница 60

Страница: 60 / 118

Description Of Controls

5.3 VIEWING THE INSTRUMENT PAGES

It is possible to scroll to display the different pages of information by repeatedly operating the next /

previous page buttons

Example

Status

Engine

Generator

And so on until the last page is reached.
A Further press of the scroll right button
returns the display to the Status page.

The complete order and contents of each information page are given in the following sections

Once selected the page will remain on the LCD display until the user selects a different page, or after
an extended period of inactivity (

LCD Page Timer

), the module will revert to the status display.

If no buttons are pressed upon entering an instrumentation page, the instruments will be displayed
automatically subject to the setting of the

LCD Scroll Timer

The

LCD Page

and

LCD Scroll

timers are configurable using the DSE Configuration Suite Software or

by using the Front Panel Editor.

The screenshot shows the factory
settings for the timers, taken from
the DSE Configuration Suite
Software.

Alternatively, to scroll manually through all instruments on the currently selected page, press the scroll

buttons. The ‘autoscroll’ is disabled.

To re-enable ‘autoscroll’ press the scroll

buttons to scroll to the ‘title’ of the instrumentation page (ie

Engine). A short time later (the duration of the

LCD Scroll Timer

), the instrumentation display will

begin to autoscroll.

When scrolling manually, the display will automatically return to the Status page if no buttons are
pressed for the duration of the configurable

LCD Page Timer

If an alarm becomes active while viewing the status page, the display shows the Alarms page to draw
the operator’s attention to the alarm condition.

If you want to view one of the
instruments towards the end of the list,
it may be quicker to scroll up through
the instruments rather than down!

If you want to view one of the instrument
pages towards the end of the list, it may
be quicker to scroll left through the pages
rather than right!

Содержание DSE8610























































































































Результаты поиска

Содержание DSE8610

Отзывы:

Бренды по названию

Популярные бренды

DSEGenset DSE8610, Руководство оператора

Результаты поиска

Содержание DSE8610

Отзывы:

Бренды по названию

Популярные бренды