Dräger Medical Savina 5664.900, Руководство пользователя, Страница: 79 / 369

All r
ight
s
rese
rved.
Copy
right
reser
v
ed.
R
566
4900S
M1
.fm 0
3
.12.0
1
A
B
C
Dräger Medical AG & Co. KGaA Service Mode Savina Version 3.0
Page 79
6HUYLFH0RGH ,QWHUQDO6HUYLFH0RGH
Test Step 15 Setting the calibration classes for the bypass valve (V1) and of the expiratory
valve (V3).
Test Step 16 Displaying the internal device temperature.
Test Step 17 Displaying the internal, analog measured values of the master processor.
Test Step 18 — see Test Step 17 —
Test Step 19 Displaying the external, analog measured values of the master processor.
Test Step 20 Displaying the internal, analog measured values of the front processor.
Test Step 21 — see Test Step 20 —
Test Step 22 Displaying and calibrating the offset and calibration voltage of the electronics for
the O
2
sensors.
Test Step 23 Calibrating the offset voltage of the inspiratory and expiratory pressure sensors.
Test Step 24 Displaying the calibration data of the O
2
sensors.
Test Step 25 — Up to SW 1.01, not assigned — as of SW 1.10, display of actual status of
display, 7-segment display, and LEDs.
Test Step 26 — Up to SW 1.01, not assigned — as of SW 1.10, setting factory default values.
Test Step 27 Input of ambient pressure and display of measured pressure values.
Test Step 28 In software version 2.0 or higher. Activation of O2 calibration valve.
Test Step 29 In software version 2.0 or higher. Display of power supply unit software version.
7DEOH
7HVWVWHS 'HVFULSWLRQ