Dräger Medical Savina 5664.900, Руководство пользователя, Страница: 365 / 369

F
o
r int
e
rnal us
e only
.
Copyright
res
e
rved.
F5
6649
00T0
1
.fm 03.12
.01
A
B
C
Dräger Medizintechnik GmbH Function Description Savina Version 2.0
Page 365
)XQFWLRQ'HVFULSWLRQ 3ULQFLSDOFRPSRQHQWV
2 FDOLEUDWLRQIXQFWLRQ
In normal operation of the unit the solenoid valve V4 is set to "measurement" - that is, the
connection between the inspiration and the oxygen sensor is open. During O
2
sensor calibration it
opens the way for the oxygen to the sensor. This layout permits online calibration of sensor S3.1
during ventilation. Sensor S3.2 must be calibrated manually (patient disconnected).
6HQVRUV
The absolute pressure sensor S6 delivers the measured atmospheric pressure value required for
O
2
measurement and for volume application. Absolute pressure sensor S7 monitors sensor S6.
Sensor S3.1 delivers the signal for the displayed value FiO
2
and the signal for control of the
inspiratory O
2
concentration. Sensor S3.2 monitors sensor S3.1.
The pressure sensor S4.1 measures the pressure in the inspiratory branch. The sensor signal, in
conjunction with the expiratory pressure sensor S4.2, measures, controls and monitors the airway
pressure. The airway pressure is measured on the basis of the measured value from the pressure
sensor in the respective no-flow branch. Pressure sensor S4.3 continuously measures the airway
pressure. The measured value is required to regulate the blower.
Solenoid valves V6.1, V6.2 and V6.3 calibrate the inspiratory pressure sensors and the expiratory
pressure sensor. During calibration, the corresponding valve interrupts the connection to the
ventilation circuit and switches the sensor to ambient pressure.