Doosan DX190W, Руководство по эксплуатации и обслуживанию

Страница: 91 / 315

OP000528
2-23
Operating Controls
NOTE: Do not operate windshield wiper without any
washer fluid. If you operate it in spite of running
out of fluid, the washer motor may be damaged.
Check level in washer tank, and add fluid as
required.
NOTE: If you use soapy water or synthetic detergent
instead of window cleaning fluid, the wiper
blade or painted surfaces may be damaged.
C. Horn switch
The center button of the lever activates the horn.
(Only while being pressed.)
D. Turn signal lever
Operates the left and right direction lights.
a. Right side direction switch - Pushing the lever
forward, activates the right side direction lights
and the direction indicator light on the
instrument panel.
b. Left side directional switch - Pushing the lever
back, activates the left side directional lights
and the directional indicator light on the
instrument panel.
NOTE: When the turn is completed the lever
automatically returns to the "NEUTRAL"
position. Should it not, it can be manually
returned by hand.
E. Dimmer switch
a. Pull up - Momentarily turns "ON" both the low
beams and high beams. (Returns to
"NEUTRAL" position when released.)
b. Neutral position - Normal low beams.
c. Push down - Locks into position and lights up
the high beams.
NOTE: High and low beams will only function with the
light switch in the "II" position.
2. Transmission Selector Switch (RH)
a. Forward travel - Pushing the lever forwards the front
selects the forward travel gear.
b. Neutral - Central position puts the gear in the
"NEUTRAL" position.
c. Reverse travel - Pull the lever to the rear to select the
reverse gear.
d. Cruise control switch - When this switch is pressed
while traveling, the travel speed is maintained without
using the foot pedal. While in this mode the engine
speed can be adjusted by turning the engine speed
O
ON
IJ
JII
FG002183
a
R
L
b
Figure 39
Figure 40
O
ON
IJ
JII
FG006179
a
b
c
FG006180
a
c
b
F
F
N
R
R
d
e
Figure 41