Doosan DX190W, Руководство по эксплуатации и обслуживанию

Страница: 136 / 315

OP000528 Operating Controls
2-68
FRONT WINDOWS
Front Upper Window
The front upper window can be housed in the cabin's ceiling.
Opening the Window
1. Lower bucket to ground.
2. Set safety lever (Figure 150) on "LOCK."
3. Set engine speed control dial to "LOW IDLE." Allow engine
to idle for three - five minutes.
4. Shut down engine by turning key to "O" (OFF) position.
5. Hold the window handles (1, Figure 151), then pull the lock
levers (2) to release the lock. The top of the front window
will come out.
6. Pull window up, and push it against lock pin at the rear of
the cabin. Make sure that it is securely latched.
7. Check that lock levers are securely latched in the lock
position.
NOTE: When the front upper window is open, never
extend your head or body through the window
frame.
NOTE: If the window happens to fall with a strong
impact against the machine, while some part of
your body is extended out of the cabin, it may
result in bodily injury.
FG002254
Figure 150
WARNING!
When leaving operator's seat, set the safety lever to
"LOCK" position (Figure 150), if not a serious accident
could occur by accidentally moving the work levers.
Figure 151
1
2
FG000192
WARNING!
When stowing front window in the cabin roof, make sure
both release levers (1, Figure 151) are latched.