Doosan DX190W, Руководство по эксплуатации и обслуживанию

Страница: 296 / 315

OP000479 Transportation
5-4
7. Set safety lever and stand on "LOCK" position.
Set parking brake switch to the "I" position and ram
Cylinder toggle switch in the "LOCK" position.
8. Shut down engine by turning key to "O"(OFF) position
(Figure 5).
9. Remove key from starter switch.
10. Before transporting the excavator, make sure that the
swing lock pin has been engaged. (See “Swing Lock Pin
and Mechanism” on page 2-76.) This will prevent the
excavator from accidentally rotating during transportation.
11. Make sure to secure the excavator onto the trailer before
transporting. Use chains or cable tie-downs as required by
local transportation laws. Use the wheel chocks supplied
with the machine to secure machine. (See “Wheel Chocks”
on page 2-76.)
12. Refer to the Dimensions for Transportation table for overall
machine height and width measurements. (See Figure 8.)
Make sure to position the excavator as shown. If not
transported in this position, the height measurements may
be different.
FG002254
Figure 6
FG000175
O
I
Figure 7
FG008670
Figure 8
FG008671
Figure 9