Doosan DX190W, Руководство по эксплуатации и обслуживанию

Страница: 208 / 315

OP000530 Inspection, Maintenance and Adjustment
4-12
MAINTENANCE INTERVALS
SERVICE ITEM PAGE
10 Hour / Daily Service
Inspect All Tires for Correct Tire Pressure and Signs of Damage or Abnormal Wear 4-15
Grease Dozer Blade Pins 4-15
Grease Outrigger Pins 4-15
Grease Boom, Arm and Front Attachment Pins (for first 100 hours) 4-15
Check Engine Oil Level 4-16
Check Level of Hydraulic Oil Tank 4-16
Check for Leaks in Hydraulic System 4-18
Check Fuel Level 4-18
Check for Leaks in Fuel System 4-19
Check Fuel Prefilter and Drain Water As Required 4-19
Check Oil Level of Swing Reduction Device 4-19
Clean Dust Net in Front of Oil Cooler and Intercooler 4-21
Check Cooling System and Refill as Required 4-21
Check Level of Window Washer Liquid 4-22
Inspect Bucket Teeth and Side Cutters for Signs of Wear 4-22
Inspect Cooling Fan Blade 4-22
Check Air Intake System 4-23
Inspect Seat Belt for Proper Operation 4-23
Inspect Structure for Cracks and Faulty Welds 4-23
Check Operation of All Switches 4-23
Check Operation of All Exterior Lights, Horn and Control Console Indicator and Monitor
Lights 4-24
Start Engine, Check Starting Ability, and Observe Exhaust Color at Start-up and at Normal
Operating Temperature. Listen for Any Abnormal Sounds 4-24
Check Operation of All Controls 4-24
50 Hour / Weekly Service
Perform All 10 Hour / Daily Service Checks 4-25
Grease Boom, Arm and Front Attachment Pins 4-25
Grease Swing Bearing 4-26
Grease Dozer Blade Pin 4-27
Grease Outrigger Pins 4-27
Grease Front Axle Pin 4-28
Drain Water and Sediment from Fuel Tank 4-28
Check Engine Fan Belt for Cracks, Wear and Correct Tension (After First 50 Hours) 4-28
Change Engine Oil and Filter (After First 50 Hours) 4-28
Inspect for Any Loose or Missing Nuts and Bolts 4-28
250 Hour Service
Perform All 10 Hour / Daily and 50 Hour Service Checks 4-29
Grease Arm and Front Attachment Pins 4-29