Doosan DX190W, Руководство по эксплуатации и обслуживанию

Страница: 40 / 315

OP000527 Safety
1-34
Proper Tools
Use only tools suited to the task. Using damaged, low qualify,
faulty, or makeshift tools could cause personal injury. There is
danger that pieces from, chisels with crushed heads, or
hammers, may get into your eyes and cause blindness.
Use of Lighting
When checking fuel, oil, battery electrolyte, or window washing
fluid, always use lighting with antiexplosion specifications. If
such lighting equipment is not used, there is danger of an
explosion.
If work is carried out in dark places without using lighting, it may
lead to injury, so always use proper lighting.
Even if the place is dark, never use a lighter or flame instead of
lighting. There is danger of fire. There is also danger that the
battery gas may catch fire and cause and explosion.
Fire Prevention and Explosion Prevention
All fuels, most lubricants and some coolant mixtures are
flammable. Leaking fuel or fuel that is spilled onto hot surfaces
or onto electrical components can cause a fire.
Store all fuels and all lubricants in properly marked containers
and away from all unauthorized persons.
Store oily rags and other flammable material in a protective
container.
Do not smoke while you refuel the machine or while you are in a
refueling area.
Do not smoke in battery charging areas or in areas the contain
flammable material.
Clean all electrical connections and tighten all electrical
connections. Check the electrical wires daily for wires that are
loose of frayed. Tighten all lose electrical wires before you
operate the machine. Repair all frayed electrical wires before
you operate the machine.
Remove all flammable materials before they accumulate on the
machine.
Do not weld on pipes or on tubes that contain flammable fluids.
Do not flame cut on pipes or on tubes that contain flammable
HDO1037L
Figure 32
HDO1040L
Figure 33
HDO1015I
Figure 34