Docomo N-04A, Инструкция по эксплуатации

Страница: 218 / 570

216
Came
ra
Before Using the Camera
You can use the FOMA terminal’s built-in camera to
shoot photos (still images) and movies.
Using the camera
● About camera mode
z
When there is no key operation for more than about
3 minutes, the camera mode ends automatically.
z
To take a close-up image, select “Close-up” in “AF
change” (P.221).
The camera is focused on an object approx. 10 cm
away from the lens.
z
The desktop icon of the camera function has three
different modes: Movie Mode, Photo Mode, and
Voice Mode. These icons can be added from the
function menu of “Camera” in “LIFEKIT”.
● Digital Shake Correction
This FOMA terminal is equipped with the Super
Digital Anti-Shake feature. The camera corrects still
images in 6 anti-shake axes, and movies in 2 anti-
shake axes.
z
“Setting the Digital Shake Correction” → P.228
When using the camera
■ Notes on shooting
z
The camera of the FOMA terminal is made with the
extremely high-precision technology. However, it
may include lines or spots that look dark or bright.
Noises such as white lines may also appear on the
photographed images particularly when shooting in
very poorly lit locations.
z
Before shooting, wipe the lens clean with a soft
cloth. Fingerprints or grease spots on the lens
could prevent the camera from focusing properly
and cause blurred images.
z
You may hear the sound of lens working when
using the camera in Auto Focus mode. This is
normal.
z
Image quality may be adversely affected if the
FOMA terminal is left in a hot location for a long
period of time.
z
The color tones and brightness levels in still images
and movies shot may differ from those of the actual
object.
z
Do not leave the camera under the direct sunlight
for a long period of time or shoot the sun or a
powerful lamp directly. This could lead to the
discoloration of the photographed images or cause
the camera to malfunction.
z
Take care that your fingers, hair, or the strap do not
cover the lens when you shoot images.
z
The shooting uses a large amount of the battery. It
is recommended to turn off the camera
immediately after you finish shooting. The screen
may look dark or blurred if you shoot images when
the battery is low.
z
You cannot change the volume or mute the shutter
sound, Auto timer tone or auto focus locked sound.
Also, you cannot set the downloaded melody as the
shutter sound.
z
If the digital shake correction is set to “OFF”, the
FOMA terminal‘s movement may cause a blurred
image when the image is shot. It is recommended
that you set the digital shake correction to “Auto”,
then shoot an image.
z
When shooting a still image, keep the FOMA
terminal steady until it emits the shutter sound and
finishes loading the shot image.
z
When you take pictures indoors, flickering may
appear due to the effect of fluorescent lighting, etc.
In such a case, changing the “Flicker” setting to the
electric wave frequency in the use region
additionally may suppress flickering.
* Red arrows are only for a still image