Docomo N-04A, Инструкция по эксплуатации

Страница: 420 / 570

418
PC Connection
Required devices
The following hardware and software, in addition to
the FOMA terminal and a PC, are required.
• FOMA USB Cable with Charge Function 01/02
(optional) or FOMA USB Cable (optional)
• Bundled CD-ROM “CD-ROM for N-04A”
Checking the Procedure
In data communication, the connection is made
through a dial-up connection with Internet service
providers or LANs that support FOMA data
communication.
■ About the software provided in the provided
“CD-ROM for N-04A”
z
The CD-ROM contains the FOMA Communication
setting file (drivers), DOCOMO Connection
Manager and FirstPass PC software.
z
The FOMA Communication setting file is software
(driver) required for connecting the FOMA terminal
with a PC via the FOMA USB Cable with Charge
Function 01/02 (optional) to carry out packet
communication, 64K data communication or data
transfer (OBEX
TM
Communication). Installing the
FOMA Communication setting file embeds each
driver into Windows.
Using the DOCOMO Connection Manager, you can
easily set up packet communication and 64K data
communication and create a dial-up connection.
Flow chart for completing the data
communication setup
■
Data transfer (OBEX
TM
communication)
When you use the FOMA USB Cable with Charge
Function 01/02, you have to install “FOMA 通信設定
ファイル ” (FOMA Communication setting file).
* Install DOCOMO keitai datalink (P.419) in addition.
■ Packet communication/64K data
communication
*: To use Internet with the FOMA terminal and PC
connected, “mopera U” (separate subscription is
required) is useful, which supports broadband
connection, etc. Consider the plan in which you are
charged only in a month when you use the service.
For more information, visit the DOCOMO website.
N
z
Purchase the specified “FOMA Cable with Charge
Function 01/02” or “FOMA USB Cable”. The USB
cable for PC cannot be used because the shape
of the connector is different.
z
USB HUB may not function correctly.
Download and Install the FOMA
Communication setting file
Install FOMA Communication setting file in the
provided CD-ROM or download and install it from
the DOCOMO website
Data exchange
Download and Install the FOMA
Communication setting file
Install FOMA Communication setting file in the
provided CD-ROM or download and install it from
the DOCOMO website
Connect/Disconnect
Install DOCOMO Connection
Manager
Set up
*
The set up procedures for packet communication,
64K data communication and set up without
DOCOMO Connection Manager are different.
To set up the
access point
using DOCOMO
Connection
Manager To set up the
access point
without using
DOCOMO
Connection
Manager