Docomo N-04A, Инструкция по эксплуатации

Страница: 98 / 570

96
Sound/Scre
en/Light Settings
Setting the FOMA Terminal to
Warn You before a Call Drops
Out
<Quality alarm>
The FOMA terminal emits an alarm tone to warn you
that the signal quality is deteriorating and the call is
likely to drop out.
z
The call may drop out without a warning tone if the
signal quality worsens very quickly.
1
i
“SETTINGS/SERVICE”
“Talk” “Quality alarm” Select
an alarm tone
Select the alarm tone from “No tone, High tone,
Low tone”.
Setting the Ring Time for
Incoming Mail
<Mail/Msg. ring time>
You can set a ring time when you receive mail, chat
mail or a MessageR/F or i-concier information.
1
i
“SETTINGS/SERVICE”
“Incoming call” “Mail/Msg. ring
time” Select an item to set the
ring time:
Select “Mail” to adjust the ring time for i-mode
mail, Area Mail and SMS.
2
“ON” Enter the ring time (01 to
30 seconds in 2 digits)
■
To turn off the ring tone
“OFF”
When “Vibrator” is activated, the vibration stops.
Restricting the Speaker’s
Volume Level when the Ring/
Alarm Tone Starts Off
<Volume restriction>
Set the speaker’s volume to “Level 1” to restrict the
volume level for the first 3 seconds when the ring/
alarm tone starts off. After the three seconds have
elapsed, the ring/alarm tone rings at the volume level
specified in “Phone” on the “Ring volume”, or in
“Alarm volume” on “Alarm”, “Booking program list”/
“Timer recording list”.
z
The demo sound, selected when specifying a ring
tone, is also restricted to “Level 1” for the first 3
seconds.
1
i
“SETTINGS/SERVICE”
“Other settings” “Volume
restriction” “ON” or “OFF”
Enabling the Tone to Ring
through the Earphone and
Speaker
<Headset usage setting>
You can set the FOMA terminal to play the ring tone
or alarm notification through the earphones and
speaker when an earphone/microphone (optional) is
connected.
1
i
“SETTINGS/SERVICE”
“External connection” “Headset
usage setting”
“speaker” or “Headset
only”
Switching Off the FOMA
Terminal’s Tone
<Manner mode>
You can set the FOMA terminal not to play the ring
tones or keypad tones through the speaker with a
single key operation.
z
Refer to the Table 1 (P.99) and Table 2 (P.99) for
details of Manner mode setting.
N
z
In the following cases, the speaker’s volume is
also restricted to Level 1 for the first 3 seconds.
• When the “Set mute seconds” option is “ON” in
“Ring time(sec.)” (after the specified mute
seconds have passed)
• “Original manner” on “Manner mode set”
z
If the “Ring volume” is set to “Step”, regardless of
the “Volume restriction” setting, the normal step
behavior is performed.
N
z
If “Ring volume” is set to “Silent”, there is no
sound from the earphone or speaker.
z
When “Phone vol.” and “Mail vol.” in the Manner
mode (Original) is set to other than “Silent”, the
ring tone still sound. However, Manner mode
(Manner mode and Super silent) is set, the ring
tone sounds only from the earphones.