Docomo N-04A, Инструкция по эксплуатации

Страница: 406 / 570

404
Netw
ork Ser
vices
Using 2in1
Set 2in1 to ON and perform settings operations.
1
i
“SETTINGS/SERVICE”
“Service” “2in1 setting” Enter
your security code “YES”
2in1 is set to ON.
■ When 2in1 is set to ON
After entering your security code, goto step 2.
2
Select any item:
Mode switching
……
Selects the 2in1 mode
from “A mode, B mode, Dual mode”.
Phonebook 2in1 setting …… Set Phonebook
2in1 setting/Group 2in1 setting for the
phonebook to appear following the mode setting
when in 2in1.
Highlight a phonebook entry or group and press
d
(Switch) to select a mode, then press
o
(Finish). The mode switches as follows each
time you press
d
(Switch): (A mode) →
(B mode) → (Dual mode)
How to search the phonebook
→
P.84
Stand-by display …… Sets the standby screen
displayed in B mode or Dual mode respectively.
→ P.100
“ ★ ” appears for the changed item. Press
p
(Reset) to reset the setting to default.
Set call/receive No.
Disp. call/receive No. …… Sets to display
the information (name, phone number, mail
address, etc.) of “Number A (Address A)”
and “Number B (Address B)” in different
font color to distinguish when making/
receiving a call.
Press
o
(Switch) to switch the color of the
pallet (16 colors or 256 colors).
Press
p
(Reset) to reset the setting to
default.
Ringtone for Number B …… Set incoming
operations for Number B. In “Voice call
(recv.)” or “V.phone (recv.)”, the following ①
Ring tone,
②
Image,
③
Illumination,
④
Vibrator and ⑤ Answer message can be
set. In “Mail (recv.)”, the following ① Ring
tone, ③ Illumination and ④ Vibrator can be
set:
Voice call (recv.), V.phone (recv.),
Mail (recv.)
……
① Ring tone: Go to Step 2 in
“Changing the Ring Tone” (P.92)
② Image: Go to “ ■ To set the calling/
receiving display” under Step 2 in
“Changing the Ring Tone” (P.92)
③ Illumination: Go to Step 1 in “Setting
the Flashing Mode of the
Illumination Lamp for Incoming
Calls” (P.105)
④ Vibrator: Go to Step 2 in “Setting the
Vibration to Notify You of Incoming
Calls” (P.94)
⑤ Answer message: Go to the step
performed after selecting “ON”
under Step 1 in “Setting Record
message” (P.72)
2in1 function OFF
Rcv. avoid. setting …… Restricts incoming calls
for Number A and Number B.
Change rcv. avoid. …… Sets the Rcv.
avoid. setting for Number A and Number B.
Check rcv. avoid.
Mode link
……
Sets the linkage for
changing 2in1 mode and Rcv. avoid.
setting. Incoming calls only for Number A
are accepted in A mode, incoming calls
only for Number B are accepted in B mode,
and incoming calls for both mode are
accepted in Dual mode.
* When the function is activated, you cannot
switch the mode with “ ” displayed.
Rcv. avoid. (abroad) …… Sets the Rcv.
avoid. setting overseas (when Mode link is
active, the Rcv. avoid. (abroad) is disabled).
N
z
When 2in1 is set to OFF, you can also perform
“2in1 settings” by pressing
2
for 1 second or
longer on the standby screen.
<Mode switching>
z
You can also change mode by pressing
2
for 1
second or longer on the standby screen.
<Phonebook 2in1 setting>
z
You cannot set this function to UIM phonebook
entries.
z
Select “Display detail” from the function menu to
display “Phonebook detail screen” from
“Phonebook list screen” in this function.