Docomo N-04A, Инструкция по эксплуатации

Страница: 19 / 570

17 Continued on next page
Ea
sy Sear
c
h/Contents/P
recautions
General Notes
c Do not water the devices.
The FOMA terminal, battery pack, adapter
(including the charger) and the FOMA card (UIM)
are not water-proof. Do not use them in humid
locations such as bathrooms, and avoid exposing
them to rain. If you carry your FOMA terminal close
to your skin, sweat may cause internal components
to corrode and result in a malfunction. If the
problem is found to be due to moisture, it will not be
covered by the warranty and in some cases may be
irreparable. Even if it can be fixed, you will be
charged since the damage is not covered by the
warranty.
c
Wipe with a soft, dry cloth (such as a cloth
for glasses).
a
The surface of the FOMA terminal’s LCD has a
specific coating to improve the visibility of the
color display. Rubbing the LCD of the FOMA
terminal with a dry cloth to clean it may scratch
the LCD surface. Handle the FOMA terminal
carefully and clean it using a soft dry cloth (of a
type used for eyeglasses). The LCD coating may
peel off or stain if moisture or soiling is left on the
surface for a long period.
a
Never use chemicals such as alcohol, thinners,
benzene or detergents as these agents may
erase the printing on the FOMA terminal or
cause discoloration.
c
Occasionally clean the connection
terminals with a dry cotton bud.
Soiled connection terminals may result in poor
connections and loss of power. Also, as it may
cause insufficient charging, clean the terminal with
a dry cloth or cotton bud when it is dirty.
c
Do not place the FOMA terminal near an air
conditioning vent.
Condensation may form due to rapid changes in
temperature, and this may cause internal corrosion
and malfunction.
c Do not apply an excessive pressure or
weight to the FOMA terminal and battery
pack.
Do not put the FOMA terminal in a bag filled with
many objects or in the hip pocket of clothing as you
sit down. This may result in faults or damage to the
LCD, other internal components or battery pack.
When an external device is connected to external
connector, it may cause connecting breakage or
malfunction.
c
Read the separate manuals supplied with
the FOMA terminal, adapter and charger
carefully.
c
Do not scrabble the display with metallic
objects.
This may cause scratch, malfunction or damage.
c
When you touch the Touch sensor, try not to
press it too strong, nor touch it with
something sharp at one end, like a nail, a
pin, or the end of a sharp pencil.
Doing otherwise may cause malfunction.
Handling the FOMA Terminal
c
Avoid using the FOMA terminal in extremely
high or low temperatures.
Use the FOMA card within a temperature range
between 5°C and 35°C with humidity between 45%
and 85%.
c
Using the FOMA terminal close to ordinary
phones, TVs or radios may affect the
operation of such devices. Use the FOMA
terminal away from such devices.
c
It is your responsibility to keep a separate
record of all data stored on your FOMA
terminal.
Under no circumstances shall NTT DOCOMO be
liable for any loss or damage to the data stored on
your FOMA terminal.
c
Be careful not to drop the FOMA terminal
nor to apply an impact force to it.
Otherwise, your FOMA terminal may malfunction
or be damaged.
c
When connecting an external device to the
external connector (Earphone/microphone
terminal), do not plug inclined in the
connector or pull the code.
This may cause malfunction or damage.
c
Do not fold the FOMA terminal with its strap
caught between the folding parts.
This may cause malfunction or damage.
c
It is normal for the FOMA terminal to
become warm while being used or charged.
It is not a malfunction and you can keep on
using.
c
Do not leave the camera exposed to direct
sunlight.
This may discolor or burn the element.
c
Usually fit the external connector cap
before use.
Failing to fit these covers may cause the FOMA
terminal to malfunction due to the dust or water
getting in.
c
Do not use FOMA terminal when the back
cover is removed.
This may cause of removing the battery pack,
malfunction or damage.
c
The surface protective film covering the
display is designed for security and safety
(to prevent scattering of hardened glass
pieces) just in case where the display is
damaged by any fall or hard shock. Please
take care not to remove or destroy this
protective film by force.
Doing otherwise can cause personal injury.
Handling with Care