Docomo N-04A, Инструкция по эксплуатации

Страница: 384 / 570

382
Character E
ntr
y
● The number of characters and scrolling
■ The number of characters remaining and the
number entered
Characters displayed in the Character entry (edit)
screen are counted according to the rules listed
below.
• When the number of characters is counted, each
double-byte character is counted as 2 bytes and
each single-byte character is counted as 1 byte.
• The single-byte dakuten “ ゛ ” and han-dakuten “ ゜ ”
are counted as 1 character respectively.
In the Character entry (edit) screen, the end mark “ ”
indicates the end of the text that can be entered using
the current function. Use the end mark as an
approximate guide to how many more characters you
can enter.
■ Scrolling
On the character entry (edit) screen, use
c
to scroll
by line.
In the conversion candidates list, you can also use
v
to scroll by page.
● Data protection during text entry and
editing
When you are entering text in the Character entry
(edit) screen and the battery fails or you receive a
voice call, the entered text is stored and not cleared
from the screen.
■ If the battery fails
If the low-voltage alarm sounds during text entry, the
Character entry (edit) screen is replaced by the
“Recharge battery” message screen. When this
happens, the entered text is automatically confirmed
and saved so that you can continue entering the text
when you turn the FOMA terminal back on and
retrieve the function. However, in some functions, the
entered data is not saved. Also, unconfirmed text that
is being converted is not saved.
Re-editing the phonebook → P.82
■ If you press
y
If you press
y
while entering text, a message
appears asking whether to exit text entry. However,
this message does not appear if no text is entered.
<To quit without saving the text>
Select “YES”. The previous screen or standby screen
reappears without saving the entered text.
You can also exit the text entry (edit) screen without
saving the entered text by pressing
y
.
<To continue entering text>
Select “NO”. The character entry (edit) screen
reappears with the entered text still displayed.
You can also return to the Character entry (edit)
screen by pressing
t
.
■ When you receive a voice call
If you receive a voice call while entering text, you can
answer the call without disturbing the text being
entered. When the call ends, the Character entry
(edit) screen reappears. You can use
i
( MULTI )
during a voice call to display the task switch screen
and return to the Character entry (edit) screen while
talking.
→
P.349
Other text entry functions
For the operations such as switching the character
entry mode on the Character entry (edit) screen or
entering symbols or pictographs, you can use useful
keys as well as the function menus.
● Useful keys to assist text entry
Key Description
o
(Chrct)
z
The character mode switches each
time you press
o
(Chrct) in 5-
touch mode and T9 input mode.
Alphabetic (single-byte) → Numeric
(single-byte) → Kanji/hiragana
(double-byte) → Katakana (single-
byte)
* Use the function menu “Single-byte/
Double-byte” to switch “Single-byte”
and “Double-byte” in Katakana,
alphabets and numbers modes.
z
Double-byte and single-byte
switches each time you press
o
(Chrct) in 2-touch mode.
Double-byte → Single-byte
o
(Chrct)
(1 second
or longer)
Switches the character entry mode.
The mode switches as follows each
time you press
o
(Chrct) (1 second
or longer).
5-touch mode → 2-touch mode →
T9 input mode
p
(PI ・ SB)
Enter pictograms/symbols
continuously or enter face marks/
URLs.
In the list is display, press
o
or
p
to
switch tab displays.
* Displayed only when the Pictograph D
(Deco-mail Pictogram) is available.
To end the continuous entry, press
t
.
p
(PI ・ SB)
(1 second
or longer)
When the Deco-mail Pictogram is
available, displays the Pictograph D
(Deco-mail Pictogram) entry screen
which is arranged by the categories.
→ P.139