Docomo N-04A, Инструкция по эксплуатации

Страница: 53 / 570

51 Continued on next page
Bef
ore Using th
e Handset
Set the main time
<Set main clock>
1
i
“SETTINGS/SERVICE”
“Clock” “Set main time” “Auto
time adjust”
■
To set the summer time
“Summer time”
When set to “ON”, time is displayed with 1 hour
added.
2
Select any item:
Auto
……
The date and time of the main clock
are set automatically.
Auto …… The time information and the time
zone information are retrieved and the date
and time are set automatically. The local
time is displayed during international
roaming.
Manual (Time zone set) …… Selects the
time zone, and the local time is displayed.
Manual (Date time set) …… Enters the date and
time in the main clock manually. Select the time
zone, then enter the date and time. Select the
time zone, then enters the date and time.
■ To enter the date and time
Using
b
to move the highlight, then use the dial
keys to enter the numbers.
Setting the sub clock
<Set sub clock>
1
i
“SETTINGS/SERVICE”
“Clock” “Set sub clock”
“Display method”
■
To set the summer time
“Summer time”
When set to “ON”, time is displayed with 1 hour
added.
■ To display the area name
“Area name”
When set to “Display”, the sub clock displays the
area name.
2 Select any item:
Auto
……
The sub clock is automatically
displayed during international roaming. For
example, the main clock is automatically
switched to the local time when Auto time
difference is set to “Auto”, but the sub clock
displays the Japan standard time.
Always
……
Selects the Time zone and sets the
sub clock to display the local time at all times.
OFF
……
Sub clock is not displayed.
Notifying the Other Party of
Your Phone Number
<Caller ID Notification>
The FOMA terminal can send your phone number
(caller ID) to the other party’s phone (Display) when
you make a call.
z
Since the phone number is important information,
please take care when you send your caller ID.
z
You cannot perform the setting when “ ” is
displayed.
N
z
After you set the date and time, you can use
functions such as “Alarm” or “Schedule” which
manages the date and time.
z
The adjustable range of the date and time is
between 00:00 on January 1, 2004 and 23:59 on
December 31, 2037.
<Auto time adjust>
z
When the power is turned on with a FOMA card
(UIM) inserted, the time is adjusted automatically.
z
If time is not adjusted for long periods after the
power is turned on, reboot the power.
z
There may occur a time lag for some seconds.
Also, time may not be adjusted depending on the
signal quality.
z
When you use your FOMA terminal overseas,
time may not be adjusted depending upon
network conditions of roaming operator. In this
case, select the time zone manually.
N
z
If “Size” under “Clock display” is set to “Up Small”,
the sub clock is not displayed.
z
When you set “Auto” in this function, the sub clock
displays the Japan time except when the time
zone of “Set main time” is “GMT+09” (the sub
clock is not displayed for “GMT+09” in Japan).