Docomo N-04A, Инструкция по эксплуатации

Страница: 395 / 570

393
Netw
ork Ser
vices
Setting for videophone …… Set whether to
support videophone record messages.
*: When 2in1 is set to Dual mode, the screen
appears to select Number A or Number B.
However, the selection screen appears for “Check
setting” even in B mode.
Call Waiting
<Call Waiting>
When you receive a call while talking on a call, this
service notifies the call with a ring tone and you can
answer the newly received call by putting the current
call on hold. You can also put your current call on hold
and make a new call to someone else.
z
To use Call waiting, select “Answer” in “Incoming
Call Mng” (P.398) beforehand. If another setting is
selected, you will not be able to answer a voice call
received during another voice call even when Call
waiting is activated.
z
You can answer another call when you receive a
videophone call during a voice call or when you
receive a voice call or videophone call during a
videophone call if you activate Call waiting and set
“Incoming Call Mng” to “Answer”. In this case, you
have to end the current voice call or videophone
call (You cannot put the current call on hold).
→ P.398
Using the Call Waiting
1
i
“SETTINGS/SERVICE”
“Service” “Call Waiting” Select
any item:
Activate, Deactivate, Check setting
N
z
If Voice Mail service is activated during Chara-
den, DTMF tone operation is not available.
Change to DTMF mode from the function menu.
→ P.56
<Check setting>
z
When checking Number B setting for 2in1, only
the active or inactive information appears.
<Check messages>
z
If you have the recorded messages stored at the
Voice mail service center, the “
” (voice mail
icon) and “ ” (“Voice mail” desktop icon) appear
on the standby screen.
z
The number in the voice mail icon changes
according to the number of stored messages
“
”, “ ”, “ ” ... “ ” (10 messages or more).
The displayed number of Voice mail messages is
the number of new messages announced by the
Voice mail center. The number of stored
messages is not included.
z
You may not be able to use this function to check
for the message recorded after checking the
message.
<Message notification>
z
When 2in1 is set to A mode or B mode, the
notification tone does not sound when a message
is recorded for the unused number.
<Erase icon>
z
Clearing the icon does not delete the
corresponding recorded messages. The voice
mail icon appears again when you check for
messages.
<Activate notice call>
z
Even if you set the SMS Rejection setting, the
FOMA terminal receives the notification.