91
Making/Receiving a Videophone Call
●
You can make a videophone call with steps 1 and 2 reversed. In this case, if you call a wrong number, please press
y
to delete the display and then dial the correct number.
●
When making a videophone call, you can use an entry in the phonebook, “Redial” or “Received calls” as well a voice
call.
●
When you can make an emergency call (110, 119, and 118) on the videophone from the FOMA terminal, your call is
automatically switched to a voice call. However, such calls cannot be made when “All lock” is set.
●
Connection is not made if you make a videophone call to a phone that does not support the videophone function, the
other party’s videophone is out of the service area or is turned off. If you make a videophone call to a phone that
does not support the videophone function with the “Voice call auto switch” (p.98) set to “ON”, your call is rejected
before videophone connection is activated and is automatically redialed as a voice call. Note that this operation may
not work when you make a wrong call, a call to the access points for ISDN synchronous 64K or PIAFS, or a call to
an ISDN videophone that does not support 3G-324M (p.88) (as of October, 2004). Be aware that you may be
charged for a communication charge in this case.
●
Once the videophone call is connected, it is not redialed as a voice call.
●
You cannot make a voice call or connect to i-mode during a videophone call.
●
When you receive a voice or videophone call during a videophone call, the call is recorded as a “Missed call” record
in the “Received calls” (p.75) and the “Missed call” desktop icon appears on the standby display.
●
i-mode mail and Msg. Request/Free cannot be received during a videophone call and are once stored in the i-mode
center. Receive these stored i-mode mail and Msg. Request/Free by “Check new message” after the videophone
call ends.
●
You can receive SMS during a videophone call.
●
When “Recharge battery”, indicating low voltage alarm, is displayed during a videophone call, the other party sees
the message “
カメラオフ
Camera Off” and the videophone call is disconnected after approximately 20 minutes.
Even if you recharge the battery before the call is disconnected, the “
カメラオフ
Camera Off” message remains on
the screen.
●
When no image is sent due to the other party’s setting, a substitute image is displayed.
●
Even when a substitute image is displayed during a videophone call, the digital communication charge is charged.
●
You cannot switch to Handsfree operation until “
” is displayed after making a videophone call.
●
Ending a videophone call turns the handsfree operation OFF.
●
You can adjust the “Volume” even when the Handsfree mode is set.
●
During the Handsfree operation, if you increase the “Volume” level, it may cause noise depending on your
surrounding.
●
If the background noise is loud during the Handsfree operation, you may not be able to talk in a good condition such
as intermittent voice reception. In this case, use the earphone/microphone with switch.
●
The videophone call duration is calculated as the “Digital” communication time.
→
p.430
●
You can switch to the handsfree mode when the manner mode is set. You return to the manner mode when you
select “OFF” in the handsfree mode or disconnect the call. The handsfree mode can be retained even if you set the
manner mode when the handsfree mode is set.
This section explains how to answer an incoming videophone call.
When you cannot answer a videophone call immediately, you can receive the call with a
substitute image without allowing your own camera view to be displayed on the other
party’s screen.
●
You cannot receive a videophone call during a voice call, i-mode operation, i-mode mail transmission and
packet data communication.
1
When a videophone call comes in, press
e
to answer it.
切替
Answer
[Video−phone call]
FUNC
10s
12:05
Change
FUNC
Receiving a Videophone Call
Continued on next page
Содержание foma N900IG
