475
Data Communication
This section describes un-installation
instructions for FOMA PC setting software.
“FOMA N900iG” is not recognized by the PC.
• See if your PC satisfies the operational environment
required.
→
pp.462 and 468
• See if the N900iG communication setting file has
been installed.
• See if the FOMA terminal is connected to the PC and
the power is turned on.
• See if the FOMA USB cable is firmly connected.
• Check if the USB mode setting (p.393) is set to
“Communication mode”.
Unable to connect with the access point.
• See if the settings for the ID (user name) and
password are correct.
• See if the FOMA USB cable is firmly connected.
• If the access point requires the Caller ID, make sure
that “184” is not added to the phone number.
• See if the box of “
フロー制御を使う
(Use the flow
control)” of the modem property is checked.
• See if the APN is set correctly.
• If you still cannot connect to the other end after
checking the above, consult with the Internet service
provider or network administrator about the setting
method.
Uninstalling the FOMA PC
setting software
(1)
To not reside the “W-TCP settings” in the
task tray.
Right-click the “W-TCP icon” in the task tray
located at the lower right corner of the
desktop and select “
常駐させない
(Nonresident)”.
1
Before uninstalling.
Right-click
Click
Before starting the uninstallation process of the
“FOMA PC
設定ソフト
(FOMA PC setting
software)”, the various changes made for FOMA
must be returned to their original settings.
3
Select “
FOMA PC設定ソフ
ト
(FOMA PC setting software)”
and click “
変更と削除
(Change and delete)”.
Select NTT DoCoMo “
FOMA PC 設定ソフト
(FOMA PC setting software)”
2
Start “
アプリケーションの
追加と削除
(Add and remove
applications)”.
For Windows 98/Windows Me/Windows 2000
Click “
スタート
(Start)”
→
“
設定
(Settings)”
→
“
コントロールパネル
(Control Panel)”
→
“
アプリケーションの追加と削除
(Add/
deleting applications)”.
“
アプリケーションの追加と削除のプロ
パティ
(Property of Add and remove
applications)” appears for Windows 98 and
Windows Me.
For Windows XP
Click “
スタート
(Start)”
→
“
コントロールパ
ネル
(Control Panel)”
→
“
プログラムの追加
と削除
(Add/deleting programs)”.
(2)
Exit any running program.
If you try to begin uninstallation while the
“FOMA PC setting software” or “W-TCP
settings” is in operation, the “
アンインス
トール中断
(Interrupt the uninstallation)”
screen will appear. Stop the uninstallation
program and exit the respective programs.
4
When the “
ファイル削除の
確認
(Confirm the file
deletions)” screen appears,
check the program name to be
deleted and click “
はい
(Yes)”.
Uninstallation starts.
5
When the program deletion is
completed, click “OK”.
Uninstallation of the “FOMA PC setting software” is
completed.
Click here
Continued on next page
Содержание foma N900IG
