Docomo foma N900IG, Руководство пользователя

Страница: 550 / 614

Traveling with N900iG
546
When network detection is not performed successfully while “Auto” is set to this function,
or when you want to switch the current network to another network while “Manual” is set
to this function, you can run a search again and switch to another network.
Re-searching accessible networks
1
Select
i
(Menu) “Network setting” “NW search
mode”.
2
Select “Network re-search”.
The network search is newly performed. When “Network switch” is set to “3G”, only 3G networks are detected.
When it is set to “GSM”, only GSM/GPRS networks are detected.
When “Auto” is set
The network is switched automatically.
When “Manual” is set
Accessible networks are displayed in list form. Select a network to roam on.
●
You can deactivate automatic search and access and perform a setting to allow manual network
switchover. After this setting is made, network detection is performed. You will then select a network to
roam on from the detected networks.
Switching the network to be connected manually
1
Select
i
(Menu) “Network setting” “NW search
mode”.
2
Select “Manual”.
The FOMA terminal detects accessible networks automatically and displays them in list form.
When “3G” is set to “Network switch”, only 3G networks are detected. When “GSM” is set, only GSM/GPRS
networks are detected.
When “Manual” is already set
The current carrier’s name is displayed here. To change the network, select “Network re-search” and go to
Step 3.
To set back to “Auto”
Select “Auto”. If you select “Auto” when “Manual” is set, network detection is performed automatically for
switchover.
3
Select a network.
is displayed for carriers that are not available.
To update the displayed network list
Press
o
[ Update ] .
● Even if you set this function to “Manual”, it automatically changes to “Auto” if the “Network switch” (p.544) setting is
changed.
● When the “Network switch” (p.544) is set to “Auto”, you cannot set this function to “Manual”.
●
When you move out of the coverage of the network you selected using “Manual” setting, “Select net” is displayed on
the standby display.
●
If you cannot connect to the carrier selected in Step 3, the setting may not work.