Docomo foma N900IG, Руководство пользователя

Страница: 485 / 614

481
Data Communication
Communication software to enter AT
commands is required for settings. This
section describes how to set it up using
“Hyper terminal” that comes with
Windows as a standard.
● Set up the access point (APN) for packet
communication. You can set up to 10 access
points (APN) up by assigning registration
numbers cid1 through cid10 (p.479).
● Since APN “mopera.ne.jp” to connect to
DoCoMo’s internet connection service “mopera”
has already been assigned to cid1, we
recommend that you enter cid into numbers 2
though 10.
● Registered cid will be connection numbers in the
dial-up connection settings.
● Contact your internet service provider or network
administrator for any other access point (APN)
than mopera.
● The AT commands entered in “Hyper terminal”
may not be shown after Step 6 on p.482. In this
case, if you enter
ATE1
AT commands you enter from then on will be
shown.
1
Connect the FOMA terminal to
the FOMA USB cable.
2
Power the FOMA terminal on
and connect the FOMA USB
cable connected with the
FOMA terminal with the PC.
<Example: for Windows XP>
Setting up the access point (APN)
Default setting cid1:mopera.ne.jp, cid2 〜 10 : not set
3
Click “ スタート (Start)” → “ すべて
のプログラム
(All programs)”
→
“ アクセサリ (Accessories)” → “ 通
信
(Communication)”
→
“
ハイパー
ターミナル (Hyper terminal)” to
start Hyper terminal.
For Windows 98
After opening “ ハイパーターミナル (Hyper
terminal)”, double-click “Hypertrm.exe”.
4
Enter any name you want in
the “
名前 (Name)” column and
click “OK”.
“sample” is entered here as an example.
5
Select “FOMA N900iG” from
“
接続方法 (Connection
method)”, and click “OK”.
If a COM port of “FOMA N900iG” can be selected
When Properties of the COM port is displayed, click
“OK”.
In this example, “COM3” is selected. See
“Checking the COM port” on p.479 to confirm the
actual COM port number of “FOMA N900iG” to be
selected in “
接続方法 (Connection method)”.
For Windows Me, Windows 2000
Open “ スタート (Start)” → “ プログラム
(Programs)” → “ アクセサリ (Accessories)” → “
通信 (Communication)” → “ ハイパーターミナ
ル (Hyper terminal)”.
If no COM port of “FOMA N900iG” can be selected
Continued on next page