Docomo foma N900IG, Руководство пользователя, Страница: 82 / 614

78
Making/Receiving a Call
<Common>
●
Switching the terminal off does not delete Dialled calls records/Received calls records. If you do not want other
people to see the Dialed/Received phone numbers, either delete the record or set “Received calls” and “Redial/
Dialled calls” in “Record display set” to “OFF”.
● When you receive a call while displaying Received calls, the record data will be updated and a message “Updating
info” may appear. You cannot switch to other record displays while this message is showing.
● While “PIM lock” is set, only phone numbers are recorded even for calls to/from parties whose names are stored in
the phonebook.
<Dialled calls record>
●
When making calls by calling up a phonebook stored as secret data in the “Secret mode” or “Secret only mode”,
these calls are not recorded in the dialed record.
● When you set “PIM lock”, “Keypad dial lock” or “Restrict dialing”, all the dialed records until then are deleted. The
dialed calls after these functions are set will be recorded in the dialed record.
<Received calls record>
● “Missed calls” and “Unknown calls” are not displayed if there are no missed calls.
● The number of missed calls which have not been checked in yet will decrease as you check in.
● When the caller notifies his/her phone number, and the caller’s phone number has already stored in the phonebook,
both the phone number and name are recorded in the received call record. If the caller does not notify the phone
number, the reason for no caller ID appears (p.166).
● When you set “PIM lock” or “Keypad dial lock”, all the received call records are deleted. After these functions are set
the received calls will be recorded in the received call record.
●
When a call comes from a party that is not in the phonebook set in “Restrict dialing” if “Restrict dialing” is set, only
the phone number is recorded.
● If you set “Missed calls display” to “Not display” under “Ringing time”, Missed calls during mute time for call alert
operations are not listed in Received calls records.
→ p.167
●
When the other party uses the dial-in service, the different phone number from its dial-in number may appear.
● You cannot use the received call record for packet communication for storing data in the phonebook or composing a
new mail.
You can adjust the volume of the other party’s voice to any of 6 different levels from “Level
1” (min.) to “Level 6” (max.).
● You can also adjust the volume during a videophone call or in the handsfree mode.
● You cannot adjust the volume when a call is coming in.
● The volume level that is set during a call or standby is retained even after the power is turned off.
1
Press
a
[Home] or
s
[Memo/Check] during a call.
A short beep sounds and the Volume screen is displayed.
You can display the Volume screen by pressing and holding down
f
or
g
for 1 second or
more.
Adjusting the earpiece volume during a call
Default setting Level 4
Volume
Adjusting the Earpiece Volume
<Example: During a voice call>