Docomo foma N900IG, Руководство пользователя

Страница: 306 / 614

302
Messaging
Compose and send a new SMS.
●
You will be able to exchange SMS with some overseas carriers other than DoCoMo. The service start
date and available overseas carriers will be announced on the DoCoMo website.
●
When you send a SMS to a person who uses an overseas carrier, characters in the message that are not
supported by the overseas carrier may not be displayed correctly by the other party's terminal. For more
information, refer to “
国際ローミングサービスマニュアル
(FOMA N900iG)” (the international
roaming service manual (FOMA N900iG)) (Japanese only).
1
Select
i
(Menu) “Compose SMS”.
2
Select “ ”, enter a destination, and then press
d
[Set].
As the SMS address, enter the recipient’s number up to 20 digits (“+” is not counted as a digit). Only one
address can be entered.
Entering characters
→
p.502
When the destination is an overseas number that is other than a DoCoMo number
Enter “+” (press
0
for 1 second or more) - Country code - Area code - phone number
When the area code starts with “0”, omit the “0” and enter the rest of the number.
To enter the destination referring to the phonebook
On the New SMS screen, open the function menu and select “Look-up address” - “Phonebook” to search
the phonebook entry
Searching Phonebook
→
p.114
To change a recipient you have entered
Select the recipient and reenter another address on the new SMS screen.
You can also change (overwrite) a recipient by selecting “Look-up address” from the function menu on the
new SMS screen.
You cannot send SMS to a recipient you have specified in the following circumstances:
• The recipient’s address contains something other than numbers, “ ”, “#” and “+”.
• The recipient’s address contains a space.
• The recipient’s address contains multiple “+”.
• “+” is placed at other than the beginning of the recipient's address.
• The number of entered characters exceeds 20 (not counting “+”).
If you have “186”, “184”, “ 31#” or “#31#” at the head of a recipient’s address, a message will appear to
advise you to delete such entry. To send SMS, select “YES” to delete it.
Composing and sending SMS
3
Select “ ” and enter message. Press
d
[Set].
Although you can enter up to 80 full-pitch characters on the message input screen, you
can only send up to 70 full-pitch characters or half-pitch katakana characters. If the
message contains only half-pitch characters (excluding symbols such as
｡｢｣｛｝ ［］ ｜､･-
ﾞﾟ＾ ｀ ˜ ), you can send up to 160 characters.
If your message exceeds this limit, a message appears to tell you that the surplus
portion will be deleted. Select “YES” to delete the portion and send the mail.
A space is also counted as 1 character.
If you select “Erase message” from the function menu, you can delete only the message
of the mail.
To delete SMS that you are editing, select “Delete” from the function menu.
Entering characters
→ p.502
Ｍｅｓｓａｇｅ／ＳＭＳ
Ｉ ｍａｄｅ ａ ｎｅｗ ｓｏｎｇ． Ｉ ｗａｎ
ｔ ｙｏｕ ｔｏ ｃｈｅｃｋ ｉｔ ｏｕｔ ｉｎ
ｔｈｅ ｓｔｕｄｉｏ ｎｅｘｔ ｔｉｍｅ．
4
Press
o
[Send] on the new SMS screen.
SMS will be sent. During the transmission, an animation will be displayed on your screen. Press “OK” to
return to the mail menu screen.
To save unfinished SMS temporarily
While composing SMS, select “Save” from the function menu.
The SMS you have been writing will be saved in the Draft box. You can save up to 10 (including i-mode
mail) messages. You can open a message later and edit if needed before sending it.
Compose and send SMS
Composing and Sending SMS