Docomo foma N900IG, Руководство пользователя

Страница: 521 / 614

517
Character Entry
2
Select “Paste” from the function menu.
ＰＩ・ＳＢ ｉｎｐｕｔ ｍｏｄｅ
Ｆｕｎｃｔｉｏｎ
Ｌｏｗｅｒ ｃａｓｅ
１／３
Ｈａｌｆ ｐｉｔｃｈ
Ｃｏｐｙ
Ｃｕｔ
Ｐａｓｔｅ
Ｃｏｍｍｏｎ ｐｈｒａｓｅｓ
Set Mode FUNC
９９
Ｔｈａｎｋ ｙｏｕ ｆｏｒ ａｂｏｕｔ ｙｅｓｔ
ｅｒｄａｙ
Ｅｄｉｔ ｃｏｍｍｏｎ ｐｈｒａｓｅｓ The characters are pasted.
If some of the characters cannot be entered on the
character entry (edit) screen
A message notifying you that these characters are
replaced with spaces appears, and the spaces are
pasted.
●
If the total number of pasted characters exceeds the permitted limit, a message notifying you that the number of
characters exceeds appears. If you select “YES”, the entered characters are pasted, and characters that exceed the
limit are deleted from the end (right side) of the text. If you select “NO”, the entered characters are not pasted and
the previous screen returns.
●
If you have already entered the maximum characters, you cannot paste any more.
You can enter kanji, hiragana, katakana, symbols, alphabetic characters (letters) and
numbers using 4-digit kuten code.
●
Select the following input mode based on your character input method before entering characters using
kuten codes.
・
Mode 1 (5-touch) : Kanji/hiragana input mode
・ Mode 2 (2-touch) : Full-pitch input mode
You can switch input mode into kuten input mode by function menu without setting above input mode.
●
For kuten codes and characters that you can enter with kuten codes, refer to p.563.
●
You can enter characters with kuten codes after the entered characters are set.
2
Enter a kuten code
0814
.
The character corresponding to the entered kuten code is
entered and the input mode returns to the original mode.
If there is no character that corresponds to the entered
kuten code
A space is entered.
＜未登録＞
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
０８ １
Set
５１２
＜未登録＞
Set FUNC Mode
５１０
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
1
Press
w
.
The input mode switches to “Kuten input mode” and “ ” appears in the information
display area.
If the character input mode is “Mode 3 (T9)”
Select “Kuten code” from the function menu.
<Example: To enter “
┏
” (kuten code 0814)>
●
Even if the character input method is “Mode 1 (5-touch)” or “Mode 2 (2-touch)”, you can enter characters by
selecting “Kuten code” from the function menu.
＜未登録＞
Ｅｄｉｔ ｍｅｍｏｒａｎｄｕｍｓ
Set FUNC Mode
５１２
Kuten codes
Using Kuten Codes to Enter Characters
4