Docomo foma N900IG, Руководство пользователя

Страница: 174 / 614

170
Camera
You can use the built-in camera in the FOMA terminal to shoot a picture (still image) and
movie.
● The miniSD memory card is optional for use in this terminal. If you do not have a miniSD memory card, it
can be purchased at various locations such as mass retailers of consumer electronics. → p.376
● The out-camera, with 1.24 mega pixel capability, enables you to shoot a large still image of 1280 × 960
dots by selecting “Mega pixel mode”. We recommend you to take a still image in this mode when you
operate the image on a PC.
● You can print out or edit an image with the printer that supports “Exif Ver2.2” or “PIM II (PRINT Image
Matching II)” and software as you like, utilizing the shooting information stored in the still image.
● Because FOMA supports DPOF (Digital Print Order Format), you can store the specific information about
still images you want to print out and the number of images in a miniSD memory card.
→ p.389
● You can save a picture or movie shot by the built-in camera to the miniSD memory card and use them on
your PC. You can also send the data to your PC by using the Data Link Software (p.569).
● For shooting movies, you can select recording images only or recording audio only other than recording
images and audio.
→ p.189
● You can also shoot a still image/movie with the Auto timer. The Auto timer can prevent camera shake
during shooting.
→ p.184
● You can attach a commercially available tripod on the backside of the desktop holder. Set the FOMA
terminal on the desktop holder to shoot a still image/movie using the tripod.
● FOMA is equipped with out-camera (installed on the rear panel of the body) and in-camera.
This is useful for shooting somebody else, animals
and scenery. The screen shows the shot that will be
captured. (The shot will be taken in the orientation
displayed on the screen.) When you take an image
from a short distance of approximately 5 to 9 cm,
you can focus the camera by using the out-camera
and switching to the macro lens. (p.184)
Can be used to shoot yourself. The image is
displayed in the mirror orientation (shot in the
symmetrical orientation shown on the display).
Out-camera
In-camera
Out-camera
In-camera
How to use the camera
• Although the cameras incorporates extremely high-precision technology, there may be some lines or dots
on the screen that appear permanently dark or bright. Note also that the amount of noise in the image
(white lines, etc.) may increase noticeably when you take pictures in dimly-lit places.
• Wipe the lens clean with a soft cloth before taking pictures. Fingerprints or grease on the lens can result in
focusing problems or dark images.
• Take care not to apply force to the lens when folding your FOMA terminal. This could damage the lens.
• The image quality may be degraded after the FOMA terminal has been left for a long period in a hot place.
• Do not expose the lens to direct sunlight or shoot the sun or extremely bright lamps directly. This could
cause the discoloration of the shot images or damage the camera.
Before Using the Camera
＊ The miniSD memory card is optional for use in this terminal. → p.376