Docomo foma N900IG, Руководство пользователя

Страница: 232 / 614

228
i-mode
<Host selection> Changing host settings with i-mode
You can set access points for using services other than i-mode service.
When no “i-mode” access point is set, i-mode and i-mode mail service cannot be used.
Also, i-
α
ppli communication may not be used on some sites.
Default setting iモード (i-mode)
※ Normally, you do not need to change the settings.
• You can access other information service providers (ISPs) by switching the access point of the FOMA
terminal. ※
Packet communication fee is charged for the ISP communication. Packet communication charges incurred
during ISP connection communication are not included in the flat-rate charge of the “Pake-Houdai” plan.
※: Additional sign-up for DoCoMo is not required.
• To start ISP communication, you need to sign up for an information service provider. For information about
service details (accessing sites, Internet connection, mail functions, etc.) and the sign-up procedure, please
contact the providers.
• Depending on the contents of the service provided by the ISP, an additional fee may be charged, which will
not be included in DoCoMo’s billing.
• Some sites you browse may notify the site provider of the information such as your phone number.
About the ISP communication
About the sign-up for information service providers
1
Select
i
(Menu) “Connection setting” “Host
selection”
2
Highlight <Not stored>, press
o
[Edit], and then enter your
security code.
Security code → p.152
Up to 10 access points can be added as the user defined hosts.
Select “i-mode” to make the host setting to “i-mode”.
3
Enter “Title”, “Host name” and “Host address”, and then press
o
[Finish].
Title : You can enter up to 9 full-pitch or 18 half-pitch characters.
Host name : You can enter up to 30 half-pitch characters.
Host address : You can enter up to 99 half-pitch characters.
Entering characters
→ p.502
“Finish” is not displayed unless “Title”, “Host name” and “Host address” are all entered.
● “User defined host” can be changed by using the same procedure as when added.
●
To delete an added “User defined host”, highlight the host you want to delete, and then select “Delete” from the
function menu.
●
You cannot make the settings during i-mode or ISP session.