Docomo foma N900IG, Руководство пользователя

Страница: 75 / 614

71
Making/Receiving a Call
You can use “ ” in a phone number as the delimiter and set the number after “ ” as a
subaddress. A subaddress is used for specified communication to a certain communica-
tion device through ISDN or the content selection from the “M-stage V Live”.
1
Select
i
(Menu) “Other settings” “Subaddress
setting”.
To activate the Subaddress function
Select “ON”.
To deactivate the Subaddress function
Select “OFF”.
Default setting ON
●
In the following cases, “ ” does not work as the subaddress delimiter and is recognized an ordinary phone number
including “ ”.
・
“ ” is placed at the beginning of a phone number.
・ “ ” is placed immediately after the prefix number “186/184”.
・
When there is a “ ” mark right after the numbers entered in “Prefix setting”.
Even if your connection drops out due to poor radio wave condition during the voice/
videophone calls, the FOMA terminal automatically tries to reconnect to the dropped
phone number as soon as reception is restored. You can also set the alarm tone ringing
pattern when a call is reconnected.
●
During i-mode operation, no alarm sounds regardless of the “Reconnect control” setting.
●
The wait time for call reconnection differs depending on radio wave condition and how the phone is used.
In general, reconnection is possible in about 10 seconds.
●
If radio wave condition suddenly becomes bad, a call may be disconnected with no alarm.
Default setting No tone
Subaddress setting
Setting a Subaddress to Make a Call
Reconnect control
Automatically Connecting a Dropped Line
4
Enter the IDD Prefix Code.
1
Select
i
(Menu) “Network setting” “Int’l dial setting”.
2
Select “IDD Prefix setting”.
3
Press
o
[Edit] and enter the IDD Prefix name.
Up to 8 full-pitch or 16 half-pitch characters can be entered as an IDD Prefix name.
Entering characters
→
p.502
The IDD Prefix name and code currently set is displayed.
A number of up to 10 digits can be entered as IDD prefix code.
Continued on next page