Docomo F-05A, Инструкция по эксплуатации, Страница: 64 / 405

62
Voice/Videophone Calls
Setting movies/images to send to
the other party during a call
1
Perform necessary operation during a call.
Switching your image and substitute image :
t
･
When Chara-den is set as the substitute image,
the Chara-den may not be displayed and the
Default image may be sent.
Switching in-camera/out-camera
*1
:
a
･
This item is set to "In-camera" by default.
･
Even when the camera is switched, settings of
Frames, Scene mode/effect, Brightness/Flicker
adjustment, etc. are kept.
Turn on/off the light
*2
:
a
(1 sec. or more)
If the light is turned on, the light turns on in white.
･
Light may be temporarily turned off by setting
operations, etc. during a call.
Switching display magnifications of camera image
<Zoom>
*1
:
h
･
Each time you press
r
, the zoom scale switches
in the order below, and each time you press
l
, it
switches in the reverse order.
In-camera : Standard → 2
u
Out-camera : Standard
→
2
u
→
4
u
→
6
u
→
8
u
→ 10
u
→ 12
u
･
Switching in-camera and out-camera cancels the
zoom.
Applying special effects to image <Scene mode/
effect>
*1
:
m e 2 e 1
-
4
Standard : Standard image
Backlight : Shooting subjects against the light
Monotone : Shooting in monochrome mode
Sepia : Shoot in sepia mode
Adjusting brightness of image
*1, 3
:
m e 31 e
Adjust with
h e p
･
This item is set to "Level 3" by default.
･
You can adjust at 5 levels.
Adjusting flicker
*1, 3
:
m e 32 e 1
-
3
The flicker may be reduced by selecting the settings
that match the power supply frequency of your area.
･
This item is set to "Auto" by default.
･
Reflected to the flicker adjustment settings of
Camera and Barcode reader.
Adding frame on image
*1
:
m e 41 e
Select
frame
･
Only the frames of 176
u
144 or smaller for Image
size can be selected.
･
Press
g
to cancel.
Sending Camera-Off images :
m e 43
The substitute image set in Substitute image is sent.
･
When Chara-den is set as the substitute image,
the Default image is sent.
Sending still image :
m e 44 e
Select a
folder
e
Select a still image
･
Only still images that are 176
u
144 or smaller for
Image size and permitted to output from the
FOMA terminal can be set.
Images that inhibited to output from FOMA
terminal
→
P238 "File restriction" in "List of display
items and changeability"
･
Press
g
to cancel.
Switching to Macro shooting
*2
: Setting Macro
shooting switch to side
You can adjust the focus when sending images of
very close objects approximately 6-11 cm away.
･
To cancel, set Macro shooting switch to side.
Setting the quality of sending/receiving images :
m e 7 e 1
or
2 e 1
-
3
Normal : Standard quality
Prefer motion spd : Motions become smoother in a
little lower-definition image.
Prefer img qual : Motions become a little slower in a
higher-definition image.
*1 This item can be set only while sending camera image.
*2 This item can be set only when using Out-camera.
*3 The settings are retained after a call.
Customizing display settings for
videophone call
･
The settings are retained after a call.
1
Perform necessary operation during a call.
Switching the main screen and the sub screen :
p
･
The main screen is set to "Other side" and the sub
screen is set to "My side" by default.
Changing the main screen size :
p
(1 sec. or more)
･
This item is set to "Large" by default.
･
Each time you hold down, the display size
switches as Large → Standard → Small → Large →
}
.
Setting screen :
m e 8 e
Set the required
items
e p
Setting items
→
P63 "Changing videophone settings"