Docomo F-05A, Инструкция по эксплуатации, Страница: 263 / 405

261
Convenient Functions
･
With Reset call cost set to "ON", PIN2 code is required when
turning the power ON or authentication is required when
performing Date & time.
･
With Reset call cost set to "ON", the settings are canceled
when FOMA terminal is turned ON with different UIM
inserted from one used when making the settings.
◆ Notifying call cost upper limit <Call
cost limit>
When Total calls cost has exceeded the set limit, it is
notified with an alarm and/or icon display, etc.
1
m e 87622 e
Authenticat
e
e
Set the required items
e p
Alert : Set if you notify that the upper limit has been
exceeded.
Limit : Enter the upper limit cost in the range of 10
yen-100,000 yen omitting the one's place.
Alert method : Set to use both an alarm and icon or
only an icon for notification.
Alert sound : Select a sound to be notified.
Alert time : Set the period of time to sound the alarm
in the range of 1-60 seconds.
❖
When the call cost has exceeded the limit
･
When the set limit cost is exceeded during a call or
communications, appears at the top of the display.
･
When the stand-by display reappears after completion
of a call or communications exceeding the set limit cost
with "Sound + icon display" set for Alert method, an
alarm sounds and message "Call cost reached limit."
appears on the display. However, the alarm does not
sound when FOMA terminal is being folded during call
or communications or when the call is terminated with
FOMA terminal folded.
･
The alarm depends on Call alert volume of Adjust
volume.
❖
Hiding call cost icon <Hide call cost icon>
1
m e 87623 e
Authenticate
e
"Yes"
✔
INFORMATION
･
Even with "Sound + icon display" set for Alert method, the
alarm does not sound or no messages appear when a call
exceeding the call cost limit is made at 0:00 on the first day
of the month with Reset call cost set to "ON".
Calculator
Using Calculator
You can perform addition, subtraction, multiplication and
division ( ＋ , − ,
u
,
y
) calculation on your FOMA terminal.
･
Up to 8 digits can be entered.
･
You can use the calculator from the entry fields of
Scheduler or Notepad and quote the calculation result.
→
P272
1
m e 74 e
Make a calculation
Functions assigned to FOMA terminal keys appear
on the calculator screen.
0
-
9
: Enter digits
rlud
: Enter
＋
,
−
,
u
, and
y
g
: Enter = (Executing calculation)
*
: Enter a decimal point
#
: Switch ＋ and − of entered numbers
a
: Delete one digit from the number entered
c
: Delete an entered number or calculation
result
Copying a calculation result :
m e 1
･
To paste the copied number, press
m2
.
･
Of the copied numbers, only the latest one
remains recorded until the terminal is turned OFF,
allowing to paste to other locations any number of
times.
✔
INFORMATION
･
An error is generated and "E" appears when the integral
part of the calculation result exceeds 8 digits or a divide-by-
zero occurs. When the number including a decimal point
exceeds 8 digits, any decimals that do not fit in the display
are rounded off.
Notepad
Creating notes
You can enter important information or notes in
Notepad.
･
Maximum number of recorded items → P334
1
m e 72 e p
･
When operating from the Display notepad screen,
press
m1
.
2
Set the required items
e p
Catg icons : Select the category icon.
Note content : Enter notes.
･
Up to 1,000 two-byte (2,000 one-byte) characters
can be entered.
Due date : To set an expiration date, select "ON" and
enter a date.