Docomo F-05A, Инструкция по эксплуатации, Страница: 106 / 405

104
Security Settings
Battery indicator
Informing low battery level with
sound and light
This function notifies you that the battery level has
changed to 1 with alarm, vibrator or light and urges you
to charge. It can lock functions other than the minimum
required functions to reduce battery drain.
1
m e 9 e
Authenticate
e
On 2nd page,
3 e
Set the required items
e p
Show indicator : Notifies that the battery level is
changed from 2 to 1 with "ON" set.
Restrict functions : Restricts the activation of
functions other than the minimum required
functions with "ON" set.
❖
When Restrict functions is set
When the remaining battery level reaches to 1,
appears on the top of the display and the functions are
restricted.
･
The functions below are available in Restrict functions
of Battery indicator ON :
- Making/receiving call
- Direct call
- Sending/receiving mail, displaying list, settings of Mail
- Check new message, displaying/setting MessageR/F
- Searching phonebook, Phonebook new entry,
Phonebook(UIM) new entry, Received calls, Redial, Recorded
messages, Mail logs, and User information
- GPS (Location request)
- Silent mode ON/OFF
- Safety alarm
- Silent alarm
- Loss protection
✔
INFORMATION
･
The operations below are made depending on the status of
FOMA terminal :
- General silent mode : Activates only the vibrator.
- Personalized silent mode : Operates the vibrator, etc. depend on
settings. Alarm sound depends on "Low Battery alert".
- School mode, Public mode (Drive mode) : Displays only messages
on the screen.
･
Alarm clock and schedule reminder do not operate even at
the specified date/time in Restrict functions of Battery
indicator ON.
Network setting
You can connect to site, change i-mode password, set
mail address and set mail reception/rejection.
1
m e 9 e
Authenticate
e
On 2nd page,
45
The setting site appears. For the subsequent
operations, follow the instructions shown on the
site.
Timed theme
Changing Restrict functions, etc.
depending on times
You can use Loss protection or activate Silent mode or
Restrict functions at the specified time. You can select
the alarm to sound once only, repeat everyday or sound
on the same day every week.
･
Up to 12 items can be registered.
1
m e 9 e
Authenticate
e
On 3rd page,
1 e
Select a title
is displayed at the left of the title for Timed theme
set.
For the active timed theme, appears on the left of
the title.
Setting/canceling the timed theme : Place the
cursor on the title and
m
.
2
Set the required items
e p
Time : Enter the time to switch the theme in the 24-
hour format.
Repeat : Set action of repeat switching.
･
When "Day of week" is selected, select the day
of week to switch in "Select Day of Week" and
press
p
.
Title : Enter up to 10 two-byte (20 one-byte)
characters for title of Timed theme.
Silent mode : Select Silent mode.
LossProtect : Set whether to use Loss protection.
Keypad dial : Set whether to activate Keypad dial
lock.
Restrict functions : Enable Mail lock, i-mode lock, i-
D
ppli lock or Camera lock.
✔
INFORMATION
･
Items set to "No change", if any, take over the previous
settings.
･
When Timed theme and alarm are set to start at the same
time, Timed theme starts after the alarm operates.
･
Even if you change Timed theme in operation, it is not
reflected until the next operation. However, the change of
time is reflected immediately.
･
Timed theme is not started/ended unless you return to the
stand-by display.
･
Even if Timed schedule is in operation, the changes to
Silent mode, Loss protection, Keypad dial lock or Restrict
functions except in Timed schedule are valid.