Docomo F-05A, Инструкция по эксплуатации, Страница: 126 / 405

124
Camera
Before using camera
･
This function is restricted by default. For use, cancel the
restriction. → P105
◆
Using camera
･
Though the camera is manufactured using extremely
accurate technology, some pixels and lines may always
be displayed to be lighter or darker than you expect.
Images shot under very low light intensity contain
increased noise such as white lines, but it is not a
malfunction.
･
If FOMA terminal is left in a warm place or exposed to
direct sunlight for a long time, images to be shot may
be deteriorated.
･
When attempting to take a photo of a strong light
source such as the sun or a lamp, images may become
dark or degraded.
･
Depending on the characteristics of the lens, distorted
images may be displayed.
･
Shooting images under illumination flickering at high
frequency such as fluorescent lamp, mercury vapor
lamp or sodium vapor lamp may cause the screen to
flicker or stripe patterns to appear on the screen, which
is called flicker phenomena, giving different coloring
for some shooting timings. Flickers or stripes may be
reduced by adjusting the brightness for shooting.
･
Images shot with the camera may differ from actual
subjects in color and brightness, depending on
conditions.
◆
Points of concern when shooting with
camera
･
If the lens is contaminated with fingerprints or skin oil,
you cannot shoot clean images. Use a soft cloth to
remove any such contaminants before taking photos.
･
Be careful not to cover the lens with fingers when
shooting images.
･
Be careful of hand movement. Though FOMA terminal
provides shake reduce function, it may become less
effective for some shooting environment and/or object.
Hold FOMA terminal firmly so that it does not move; or
use of Auto timer function with FOMA terminal placed
in a stable location is recommended. Shake reduce or
auto timer function is only available when shooting still
images.
･
There is a small time lag between taking a picture and
pressing
g
. Do not move FOMA terminal for a while
after pressing
g
. If you take a fast moving subject, the
image taken might slightly differ from the subject
displayed in the screen when pressing
g
.
･
If you shoot the quickly moving subjects when
recording a movie, the image may be blurred.
･
When shooting with the in-camera, the image is
displayed as mirrored image but saved as normal
image. Note that you can also save the still image as
mirrored image. → P127
･
Images shot with the camera with i- D ppli are saved in
the i- D ppli ("i-mode" folder or "Deco-mail picture"
folder for some i-
D
ppli). In some cases, automatically
sent to the server.
･
If battery power goes out before saving shot image, the
image cannot be saved.
･
As the camera consumes the battery power very
quickly, do not leave the camera activated for a long
time or do not leave shot images unsaved for a long
time.
･
Some settings may require extra time for an image to
be displayed on the shooting screen when starting the
camera.
･
There are some unavailable functions or settings when
Camera is activated from Phonebook, mail or i-
D
ppli.
◆ Shooting procedure
When shooting, hold the FOMA terminal firmly so that it
does not move.
･
To avoid blurring when shooting images, use of the
shake reduce function is recommended.
→
P135
･
If no operations are performed for approximately 3
minutes during shooting stand-by, camera ends.
Shooting with
g