Digital Monitoring Products
XTLplus International Series Installation and Programming Guide
34
Arming zone operation
If a bad (faulted) Priority zone is in the area being armed by an Arming zone, the arming
is stopped. If there are no Priority zones, or they are all in a normal condition, the
following applies:
When a non-Priority zone is bad when an area is armed with a keyswitch on an Arming
zone, the arming is delayed for five seconds. If, during the five-second delay, the
keyswitch is turned to disarm, the arming stops. If the keyswitch is held in the arming
position for the full five seconds, the bad zone is force armed and the area is armed.
The ability to stop the arming does not apply if a wireless arming device is being used.
Refer to the Appendix.
Arming from a zone, Wi-Fi, or Remote Link is not affected by this operation.
Area Assignment
To change the default area, press any select area.
For Area systems, enter the area number from 1 to 6 where this zone is being assigned.
For All/Perimeter systems, choose INTERIOR or PERIMETER.
For Home/Away systems, choose INTERIOR, PERIMETER, or BEDROOMS.
• INT (Interior) - Assigns the zone to area 2, Interior.
• BDRM (Bedroom)- Assigns the zone to area 3, Bedrooms. This option is only
displayed in Home/Away systems.
• PERIM (Perimeter) - Assigns the zone to area 1, Perimeter.
Style
This option specifies the style for the arming/disarming operation. The default for
STYLE: is TGL (toggle). Pressing any select area displays the STYLE options. To view
more style options press
CMD
. The following is a description of the action for each
option condition.
TGL (Toggle) - When the zone changes from normal to shorted, the programmed areas
toggle between the armed or disarmed condition. When restored to normal, no action
occurs. When the zone is opened from a normal (disarmed) state, a trouble is reported.
When opened from a shorted (armed) state, an alarm is reported and the zone is
disabled until you disarm the area(s) from either a keypad or Remote Link™ computer.
ARM - When the zone is shorted, the programmed areas are armed. When restored to
normal, no action occurs. When the zone is opened from a normal (disarmed) state, a
trouble is reported. When opened from a shorted (armed) state, an alarm is reported.
DIS (Disarm) - When programmed as an Area system, a short will disarm the
programmed areas. When programmed as a ALL/PERIM or HOME/AWAY system, a short
will disarm ALL areas. When restored to normal, no action occurs. When the zone is
opened from a normal (disarmed) state, a trouble is reported.
STEP - When programmed as an area system, a short will arm the areas and beep the
keypads once. When programmed as ALL/PERIM or HOME/AWAY, on the first short
HOME will arm and beep the keypad once. On the second short, SLEEP will arm and
beep the keypads twice. On the third short, AWAY will arm and beep the keypad three
times. A normal condition will cause no action. An open condition will disarm the
programmed areas and beep the keypads for one second.
This arming style is designed for wireless arming pendants. When using a arming/
disarming keyswitch, locate the keyswitch within the protected area.
MNT (Maintain) - When the zone is shorted, the programmed areas are armed. When
restored to normal, the programmed areas are disarmed and any alarm bells are
silenced. When the zone is opened from a normal (disarmed) state, a trouble is reported.
If opened from a shorted (armed) state, an alarm is reported and the zone is disabled
until you disarm the area(s) from either a keypad or Remote Link™ computer.
AREA NO: -
INT PERIM
STYLE:
TGL ARM DIS STEP
MNT
