XTLplus International Series Installation and Programming Guide
Digital Monitoring Products
17
When an SSID is entered for the first time or changed, the panel searches for the SSID
entered to ensure communication. The keypad displays SSID FOUND or SSID NOT
FOUND. When the SSID is found, the security type is also detected.
Enter up to 32 characters for the SSID from the network router to identify the network
LAN. The SSID is blank by default. Use the chart below to enter lowercase or special
characters. Each successive press of the select key or area gives additional options. For
example, to enter Me5%, you would press 5, select key or area 1 (M); press 2, select key
or area 2 twice (e); press 5 (5); press 7, select key or area 4 twice (%).
Number
Select Key or
Area 1
Select Key or
Area 2
Select Key or
Area 3
Select Key or
Area 4
When \ is
entered,
the keypad
displays ¥.
When ~ is
entered, ->
displays.
1
A, a,
B, b
C, c
(, [, {
2
D, d
E, e
F, f
), ], }
3
G, g
H, h
I, i
!, ^, ~
4
J, j
K, k
L, l
?, ", |
5
M, m
N, n
O, o
/, \, `
6
P, p
Q, q
R, r
&, $
7
S, s
T, t
U, u
@, %
8
V, v
W, w
X, x
, =
9
Y, y
Z, z
space, :
_, ;
0
-, +
., '
*, <
#, >
While searching, SEARCHING displays on the keypad. If the panel can not connect to the
desired network SSID NOT FOUND displays. Press
CMD
to return to the main menu and
WPS LIST MANUAL displays. Press
CMD
again to display TEST.
Test
Press the first select area to select TEST and the panel will attempt to verify connection
of your system to the desired Wi-Fi network.
Wireless Security Type
When successful, W/L SECURITY displays. Select the security type based on the
network router programming. The default network security type is WPA-PSK. Press any
select area to display the other security options. The available options are WEP, WPA,
and NONE.
Press the first select area to choose WEP, press the second select area for WPA, press
the third select area for NONE.
Wireless Network Key
This option displays only if Comm Type is set to Wi-Fi and Security option is not set to
NONE. Enter the key provided from the network router’s programming. WEP requires
a network password of 10 characters (WEP64) or 26 characters (WEP128), using a
combination of the number 0-9 and the letters A-F. WPA/WPA-PSK uses a custom
key that allows 8 to 32 characters (See the chart above to enter lowercase or special
characters). Press
CMD
to save the key.
DHCP
If the panel uses a dynamic IP address Select YES. When set to YES the panel operates
in DHCP and will not use the Local IP Address number.
Local IP Address
Enter the local IP address for the panel. The Local IP Address must be unique and
cannot be duplicated on the network. The default local IP address is
192.168.000.250
.
Gateway Address
Enter the local gateway address. The Gateway IP Address is needed to exit the local
network. The default gateway address is
192.168.000.001
.
Subnet Mask
Enter the local subnet mask assigned to the panel. The default subnet mask address is
255.255.255.000
.
SSID
SSID FOUND
TEST
W/L SECURITY
WPA-PSK
W/L SECURITY
WEP WPA NONE
W/L KEY
*****************
DHCP
NO
YES
LOCAL IP ADDRESS
192 .168.0.250
GATEWAY ADDRESS
192 .168.0.250
SUBNET MASK
255.255.255.0
