manualshive.com logo in svg

DMP Electronics XTLplusINT Series, Инструкция по установке и программированию

Поделиться
Скачать
DMP Electronics XTLplusINT Series Скачать руководство пользователя страница 33

Digital Monitoring Products

 

XTLplus International Series Installation and Programming Guide

26

Trouble Audible Annunciation

Press any top row key to select the keypad buzzer annunciation method for wireless low 
battery and missing messages.
Select ANY to enable annunciation anytime.
Select DAY to enable annunciation except during sleeping hours (9 PM to 9 AM).
Select MIN (minimum) to annunciate only Fire and CO zones during daytime hours (9 
AM to 9 PM). Default is 

DAY

.

Enable Keypad Panic Keys

This option allows the two-button panic key operation selected at a keypad to send the 
Panic, Emergency, or Fire message to the central station receiver. Select YES to enable 
the two-button panic operation. To disable the two-button panic operation, select NO. 
Default is 

YES

.

Wireless Encryption

Encryption allows the panel to communicate with encrypted 1100INT Series wireless 
devices that are v700 and higher. Select ALL to to allow encryption for all the wireless 
devices programmed into the panel. Select BOTH to allow both encrypted and non-
encrypted wireless devices to be programmed into the panel. Select NONE to don’t 
allow encryption for wireless devices programmed into the panel. The default is 

NONE

.

Enter Passphrase

ENTER PASSPHRASE displays if you select ALL or BOTH for wireless encryption. In 
order for the panel to support encrypted 1100INT Series wireless devices, a passphrase 
must be entered. The passphrase must be an 8-digit hexadecimal number which 
determines the system’s encryption key.

Occupied Premises

Select YES to allow the panel to automatically disarm the interior area(s) when arming 
all areas and a perimeter zone is not tripped during the exit delay.
This False Alarm Reduction feature keeps a user from arming the entire system when 
they do not exit and remain in the premises. Select NO to not automatically disarm 
interior area(s). Default is NO.

Use False Alarm Question

Select YES to display IS THIS A FALSE ALARM?  NO YES at the keypad in place of 
CANCEL  VERIFY when a burglar alarm occurs. Select NO to display CANCEL VERIFY 
for burglar alarms. This operates for ALL/PERIM and HOME/SLEEP/AWAY arming 
systems. Default is 

YES

.

Weather Postal Code

This option allows local weather updates to display on the keypad. Enter the postal 
code of the user at this option. Press CMD and enter the two-letter country code (ISO2). 
When no number is entered weather conditions are not displayed. Default is -.

TRBL  AUDIBLE:  DAY

KEYPAD PANIC KEYS

ENABLED:    NO    

YES

1100 ENCRYPTION

ALL    BOTH    

NONE

1100 PASSPHRASE

********

OCCUPIED 

PREMISES:  NO   

YES

USE FALSE ALARM 

QUESTION    NO    

YES

ENTER WEATHER 

ZIP CODE:                

0

Содержание XTLplusINT Series


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды