manualshive.com logo in svg

DMP Electronics XTLplusINT Series, Инструкция по установке и программированию

Поделиться
Скачать
DMP Electronics XTLplusINT Series Скачать руководство пользователя страница 29

Digital Monitoring Products

 

XTLplus International Series Installation and Programming Guide

22

Late To Open

Enter 1-240 as the number of minutes to elapse that the system may remain armed after 
the opening time of a schedule without sending a Late To Open message. If the system 
continues to be armed after the Late to Open minutes expire, a Late To Open message is 
sent to the central station. Default is 

0

, which disables the Late To Open option.

Early To Close

Enter 1-240 as the number of minutes that the system can be armed prior to the 
scheduled closing time. If the system is armed prior to the Early to Close minutes, an 
Early To Close message is sent to the central station. Default is 

0

, which disables the 

Early to Close option.

Entry Check-in Protection

If YES is selected, this enables the panel to send a Serial 1 check-in message when an 
Entry Delay begins. The fail time included in this message is the programmed Entry 
Delay (rounded up to the nearest minute) plus one minute.

When the System is Disarmed, (either before or after going into Alarm, regardless of 
Transmit Delay) another check-in message will be sent. The fail time for this check-
in message is 0 if regular check-ins are not programmed and is the normal fail time if 
check-ins are programmed. During the time frame between the beginning of the Entry 
Delay and the following check-in message, regular check-in messages are suspended. 
The default is 

YES

.

LATE TO OPEN 

MINUTES:               

0

EARLY TO CLOSE

MINUTES:             

0

ENTRY CHECKIN

                  

NO

    YES

Содержание XTLplusINT Series


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды