XTLplus International Series Installation and Programming Guide
Digital Monitoring Products
25
Arm Activity Days
This allows selection of the number of days a countdown timer is set for area arming and
disarming activity. The range for the countdown timer is 00 to 99.
When the timer counts down to zero because of no arming or disarming activity, the
panel sends a “No Arming/Disarming” message to the receiver at 10:00 AM. Each time
an area is armed or disarmed, the timer is restarted. When the countdown timer expires
because of no arming or disarming activity, and a message is sent, the timer does not
restart until a panel reset occurs or an area is armed or disarmed. The SUPV/TRBL
receiver option must be selected in communication programming for the message to be
sent.
Time Zone Changes
This option allows the panel to request automatic time changes from the DMP SCS-
1R Receiver. For the receiver to send time changes, it must be programmed to send
time changes and must be receiving time change updates from the host automation
computer at least every 24 hours. Default is
YES
.
When time zone is programmed YES, enter the number (0-23) that indicates the
Greenwich Time zone (GMT) where the panel is located. The default is
6
. See table for
GMT values.
GMT
City/Time Zone
GMT
City/Time Zone
0
London, Monrovia, Lisbon, Dublin, Casablanca, Edinburgh
13
New Caledonia
1
Cape Verde Island, Azores
14
Guam, Sydney
2
Mid-Atlantic, Fernando de Noronha
15
Tokyo, Seoul
3
Buenos Aires, Georgetown, Brasilia, Rio de Janeiro
16
Hong Kong, Singapore
4
Atlantic Time (Canada), Caracas, La Paz, Santiago
17
Bangkok, Hanoi
5
Eastern Time (US, Canada) Bogota, Lima, Arequipa
18
Dhaka, Almaty
6
Central Time (US, Canada), Mexico City, Saskatchewan
19
Islamabad, Karachi
7
Mountain Time (US, Canada), Edmonton
20
Abu Dhabi, Kazan
8
Pacific Time (US, Canada), Tijuana
21
Moscow, Bagdad
9
Alaska
22
Eastern Europe
10
Hawaii
23
Rome, Paris, Berlin
11
Midway Island, Samoa
12
Fiji, Marshall Island, Wellington, Auckland, Kwajalein, Kamchatka
Time Display
YES allows the keypad to display the time and day in the Status List. When NO is
selected, time and day of the week are not displayed.
House Code
A Wireless House Code between 1 and 50 is pre-programmed at the factory. To change
the house code, press any select area. Enter a House Code from 1 to 50 and press CMD.
The XTLplusINT automatically programs the house code into the wireless transmitters
when the unique transmitter serial number is programmed into the panel. See Wireless
programming in Zone Information. The house code identifies the panel, receiver, and
transmitters to each other. When operating, the receiver listens for transmissions that
have the programmed house code and transmitter serial number.
Detect Wireless Jamming
When enabled and the receiver detects jamming, a trouble or alarm message is sent to
the receiver and displays in the Status List. Select YES to enable jamming messages to
display in the Status List. Select NO to disable jamming messages. Default is
NO
.
ARM ACTY DAYS: 0
TIME CHG NO
YES
HRS FROM GMT: 6
TIME DSP NO
YES
WIRELESS
HOUSE CODE: 0
DETECT WIRELESS
JAMMING:
NO
YES
