XTLplus International Series Installation and Programming Guide
Digital Monitoring Products
7
WIRELESS KEYPADS
Mounting Wireless Keypads
DMP Wireless keypads have removable covers that allow the base to be mounted on a wall, desk stand or
other flat surface using the screw holes provided on each corner.
PROGRAMMING INTRODUCTION
Before You Begin
Before starting to program, we recommend you read through the contents of this manual. The information in this
document allows you to quickly learn the programming options and operational capabilities of the
XTLplusINT panel.
After this Introduction, the remaining sections describe the functions of each of the programming menu items along
with their available options. The panel contains all of its programming information in an on-board processor and does
not require an external programmer.
In addition to this manual, you should also be familiar with the following XTLplusINT documents:
• XTLplusINT User’s Guide (LT-1442INT)
• XTLplusINT Fast Programming Sheet (LT-1441FINT)
• XTLplusINT Programming Sheet (LT-1441INT)
Programming Information Sheet
Included with each XTLplusINT panel is the Programming Sheet. This sheet lists the various options available for
programming the panel. Before starting, completely fill out the sheet with the programming options you intend to
enter into the panel.
Having completed programming sheets available while entering data helps to prevent errors and can shorten the
length of time you spend programming. Completed sheets also provide you with an accurate account of the panel’s
program you can keep on file for future system service or expansion.
The remainder of the Introduction explains starting and ending a programming session.
Getting Started
Ground yourself before handling the panel! Touch any grounded metal before touching the panel to discharge static.
The panel should be completely installed before you begin programming. Make sure the AC and battery wires are
correctly installed.
Program from a Wireless or LCD Keypad
The panel can be programmed using a wireless keypad that has been auto paired or manually associated with the
panel. You can also program the panel using an LCD keypad connected to the panel PROG header.
Auto WPS
The panel offers a convenient way to connect to a Wi-Fi network. Press the WPS button on your router within 5
minutes of powering the panel to automatically connect to the Wi-Fi network.
Wireless Keypad Auto Pairing
Wireless keypad auto pairing allows you to skip the Wireless Keypad Association process and automatically connect
your keypad to the panel. Auto pairing is only available for 9862INT Series Wireless Graphics Touchscreen Keypads
(Version 700 or higher) that do not have a previously assigned house code. A maximum of seven wireless keypads are
allowed on each panel.
To pair a 9862INT Series keypad with an XTLplusINT panel, power up both the panel and the keypad. A 10 minute
pairing timer begins. The auto pairing process starts immediately and the keypad displays Pairing Keypad With
System. See Figure 7. If the panel acquires the keypad during that time, the home screen displays signaling that
pairing is complete.
If the panel does not acquire the keypad by the end of the 10 minute pairing timer, the keypad displays Pairing Failed,
followed by the Reset screen. See Figure 9 and Figure 10. Reset your panel and tap the Pair button to restart the
pairing process.
If the keypad loses communication with the panel, the No Communication With System display appears and provides
the option to reattempt pairing. See Figure 10.
